Bedienungsanleitung Bosch MMBV6 (Seite 22 von 236) (Alle Sprachen)

700733

Zoom out

Zoom in

Vorherige Seite

1/236

Nächste Seite

en Use

Blending with automatic

programme

X Image sequence C

1. Set the rotary selector to 0. Switch

on the appliance with button. All

indicators light up briefly once and a

short signal tone sounds. The button

lights up.

2. Press button. The and

symbols light up.

3. The vacuum pump draws the air out of

the blender jug. The status display LEDs

light up one by one.

Note: If the preset vacuum level is

not reached, the symbol then lights

up and 2 short signal tones sound.

X

4. The status display lights up halfway. The

preset vacuum level is reached.

5. The blender starts processing

automatically and blends the ingredients

in a pulsing rhythm. The second half of

the status display gradually lights up.

6. The blender ends processing

automatically. Wait until the appliance

comes to a standstill.

7. Switch off the appliance using button.

Disconnect the mains plug.

8. Open the cap completely.

9. Turn the blender jug anticlockwise and

remove.

10. Grip the vacuum seal at one end and

pull it up. Sufficient air has to get inside

the blender jug for the lid to be removed.

11. Pull the lid by the lug to remove.

12. Pour the blended food into another

container.

 Clean all parts. X



Note: To keep the food fresh, put it in the

ToGo bottle or storage containers after

processing and apply a vacuum again.

X

Manual blending with vacuum

function

X Image sequence D

1. Set the rotary selector to 0. Switch

on the appliance with button. All

indicators light up briefly once and a

short signal tone sounds. The button

lights up.

2. Press button. The symbol

lights up.

3. The vacuum pump draws the air out of

the blender jug. The status display LEDs

light up one by one.

Note: If the preset vacuum level is

not reached, the symbol then lights

up and 2 short signal tones sound.

X

4. All status display LEDs are lit. The

preset vacuum level is reached.

5. Set the rotary selector to the required

level or . The higher the speed, the

more status display LEDs are lit.

6. Process the ingredients until the desired

consistency is achieved.

7. Set the rotary selector to 0. Wait until

the appliance comes to a standstill.

 Switch off the appliance using button.

Disconnect the mains plug.

 Perform steps from 8. as described.

X



Using the Pulse function

 Turn the rotary selector anticlockwise to

the position and hold.

 The appliance will run at maximum

speed for as long as the rotary selector

is held.

 Release the rotary selector.

Blending without vacuum

function

Prepare blender as described.

X

X Image sequence E

1. Set the rotary selector to 0. Switch on

the appliance with

button.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch MMBV6 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info