Bedienungsanleitung Bosch MS8CM6160 (Seite 15 von 139) (Alle Sprachen)

700716

Zoom out

Zoom in

Vorherige Seite

1/139

Nächste Seite

Whisk

8. Release the button once processing has

finished or the processed food reaches

the underside of the carrier disc. Wait

until the drive comes to a standstill.

Disconnect the mains plug.

9. Hold down both release buttons and

remove the base unit.

10. Rotate the lid in a clockwise direction

and remove.

11. Grasp the carrier disc by the recessed

grips and remove.

12. Empty the container.

 Clean all parts immediately after use.

X “Cleaning and maintenance” see

page 15

Sample recipe:

Potato patties

– 500 g potatoes

– 1 large egg

– 3 tbsp flour

– Salt and pepper to taste

Tool: grating insert

 Peel and grate the potatoes.

 Then mix the potatoes, egg, flour, salt

and pepper.

 If the mixture is too liquid, add some

more flour.

 Heat the oil in a pan. Then add a large

spoonful of the mixture to the oil and

shape into patties. Fry on both sides

until golden brown.

Whisk

For whipping cream, beating egg whites

and milk froth from hot milk (max. 70 °C)

and cold milk (max. 8 °C) as well as for

making sauces and desserts.

W Risk of scalding!

When processing hot liquids, use a tall, thin

blending receptacle.

Warning!

– Never insert the whisk into the base unit

without the gear attachment.

– Do not attach or remove the gear

attachment with the whisk until the

appliance is at a standstill.

X Fig G

1. Place the prepared food in the blender

jug or other suitable receptacle or

process in the pan used for cooking.

2. Place the gear attachment on the whisk

and press until it clicks into position.

3. Place the whisk with the gear

attachment on the base unit and press

until it clicks into position.

4. Connect the mains plug.

5. Set the required speed with the speed

control (high speed recommended)

6. Take hold of the base unit and blender

jug and press the ON button Ã.

7. Process the food with the whisk.

8. Release the ON button after processing.

Wait until the drive comes to a standstill.

9. Disconnect the mains plug.

10. Hold down both release buttons

and remove the whisk with the gear

attachment from the base unit.

11. Remove the gear attachment from the

whisk.

 Clean all parts immediately after use.

X “Cleaning and maintenance” see

page 15

Cleaning and maintenance

The accessories used must be thoroughly

cleaned after each use.

W Risk of injury

Do not touch the sharp edges of the

universal blade, ice crusher blade or the

cutter inserts with bare hands. To clean,

only grasp by the plastic and use a brush.

Warning!

– Do not use cleaning agents containing

alcohol or spirits.

– Do not use sharp, pointed or metal

objects.

– Do not use abrasive cloths or cleaning

agents.

– Never immerse the following parts

in liquids, hold under running water

or clean in the dishwasher: gear

attachments, lid with gears.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch MS8CM6160 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info