Bedienungsanleitung Bosch MUC11W12 (Seite 27 von 126) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

697139

Zoom out

Zoom in

Vorherige Seite

1/126

Nächste Seite

Changing presettings

my mode

Manual cooking with individual settings for

the preparation time and temperature.

■ Once the appliance has been switched

on, in function selection mode, button

B and the indicator [my mode] are per-

manently lit. Button G flashes. “00:00”

lights up in the display.

■ Press button F once. “00:00” flashes in

the display.

■ Keep pressing, or press and hold,

button F until the desired preparation

time is displayed.

■ Press button C once. “00c” flashes in the

display.

■ Keep pressing, or press and hold,

button C until the desired preparation

temperature is displayed.

■ Press button G to start or continue

the preparation programme with the

individual values.

■ The appliance heats up the pan until the

target temperature is reached.

■ Once the target temperature is reached,

the lines go out and the preparation time

is shown in the display. The preparation

process starts automatically.

Changing presettings

Depending on the programme, the pre-con-

figured values for temperature, time or start

time delay can be changed according to

your individual needs.

The values are set by pressing the applica-

ble button. The values will change faster if

the button is pressed and held down. Once

the maximum value of a setting has been

reached, the display will jump back to the

minimum value.

Setting a start time delay

Depending on the preparation program, the

time until the programme is started can be set.

■ Select the preparation programme.

■ Press button A. Button G flashes.

A pre-configured value flashes in the

display.

■ Pressing button A increases the time

displayed.

■ Press button G when the desired start

time delay is displayed.

■ The desired start time delay is shown

in the display. [timer] lights up in the

display.

■ The time until the start counts down.

The preparation process starts automat-

ically after this.

Please note:

■ The start time delay can be switched

off at any time by pressing button G.

The preparation programme then starts

immediately.

■ If a pre-configured time does not flash

in the display, a start time delay cannot

be set for the selected preparation

programme.

Setting the preparation

temperature

The temperature can be individually

changed either before or during preparation.

■ Before preparation:

In function selection mode, keep

pressing button D until the desired

preparation programme is selected.

■ Press button C once. The pre-configured

preparation temperature flashes in the

display.

■ During preparation:

Press and hold button C. The current

preparation temperature is briefly shown

on the display.

■ Change the values: Press button C

repeatedly, or press and hold it until

the desired preparation temperature is

reached.

■ Press button G to start or continue

the preparation programme with the

individual values.

Note: If button G is not pressed, the

preparation programme will continue with

the temperature that was previously set.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch MUC11W12 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info