Bedienungsanleitung Bosch MUMXL (Seite 22 von 132) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Schwedisch, Norwegisch, Finnisch)

526401

Zoom out

Zoom in

Vorherige Seite

1/132

Nächste Seite

22 Robert Bosch Hausgeräte GmbH

 Set the whisk to the optimum height

by rotating the whisk:

– Turn clockwise: Raise

– Turn anti-clockwise: Lower

 Press release button and move

multi-function arm to position 2.

Check the height of the whisk and,

if required, correct.

 When the height has been set

correctly, press the release button

and move the multi-function arm

to position 1.

 Hold whisk in place and tighten nut

anti-clockwise using enclosed key.

Working with the bowl

and the tools Fig. 

 Press release button and move

multi-function arm to position 1.



Cover unused drives with drive covers.

 Insert the bowl:

– Tilt the bowl forwards and then

set it down.

– Turn anti-clockwise until it locks into

place.

 Depending on the processing task, insert

the stirrer, whisk or kneading hook until

it locks into position.

Note:

If using the kneading hook, first insert

dough deflector, then the kneading hook

(Fig. –4b).

Note shape and position of the parts.

 Put the ingredients to be processed into

the bowl.

 Press release button and move

multi-function arm to position 2.

 Attach the cover.

 Insert the mains plug.



Set the rotary switch to the desired setting.

Our recommendation:

– Stirrer:

First mix at setting 1–2, then setting

3–7 as required

– Whisk:

setting 7, mix in at setting 1

– Kneading hook:

first stir in at setting 1, knead at setting 3

Adding more ingredients

 Switch off the appliance with the rotary

switch.

 Attach funnel.

 Top up ingredients through the funnel.

 Remove lid.

 Press release button and move multi-

function arm to position 1.

 Add ingredients.

After using the appliance

 Switch off the appliance with the rotary

switch.

 Remove mains plug.

 Remove lid.

 Press release button and move

multi-function arm to position 1.

 Take the tool out of the drive.

 Remove the bowl.

 Clean all parts, see “Cleaning and

servicing”.

Blender

Warning!

Operate the blender in the indicated

operating position only.

Operate the assembled blender only and with

the lid attached. Lid must be locked correctly.

Do not operate blender when empty.

Preparation Fig. 

Warning!

Never assemble the blender without the seal

on the blender holder.

Putting the blender together:

 Insert blender holder with seal into

the blender jug, ensuring that the line

is under the arrow.

 Attach blender holder by rotating it as far

as possible to the right.

Risk of injury from sharp

blades/rotating drive!

Never place fingers in the attached

blender! Do not remove/attach the

blender until the drive is at a standstill!

Do not switch on the appliance until the

blender has been screwed in all the way

and the tool drive cover (7) has been

attached.

Risk of scalding!

If processing hot liquids, steam escapes

through the funnel in the lid. Add a max.

0,75 litres of hot or frothing liquid.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch MUMXL Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info