Bedienungsanleitung Bosch MUMXL (Seite 24 von 132) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Schwedisch, Norwegisch, Finnisch)

526401

Zoom out

Zoom in

Vorherige Seite

1/132

Nächste Seite

24 Robert Bosch Hausgeräte GmbH

Tip: After processing liquids, it is often suffi-

cient to clean the blender without removing

it from the appliance. Pour a little water and

washing-up liquid into the attached blender.

Switch on the blender for several seconds

(setting M). Pour out the water and rinse

out the blender with clear water.

Troubleshooting

The multi-function arm must be engaged

in each operating position.

Initially try to eliminate the problem which

has occurred with the help of the following

information.

Fault

Appliance does not start.

Remedial action

 Check the power supply.

 Check the mains plug.

 Check multi-function arm.

Correct position? Engaged?

 Screw on bowl all the way.

 Attach drive cover to unused drives.



The safety lock is active.

Switch appliance to 0/off and then back

to the required setting.

Fault

Appliance switches off during use.

The overload protection feature has been

activated. Too much food was processed

at one time.

Remedial action

 Switch off the appliance and pull out the

mains plug.

 Leave the appliance to cool down

for 15 minutes in order to deactivate

the overload protection.

 Reduce processing quantity.

Do not exceed permitted maximum

quantities (see “Application examples”).

 Switch on appliance again.

If the motor still does not start, leave

the appliance to cool down for a longer

period (at least 1 hour).

Fault

While the drive was running, the release

button was inadvertently pressed.

The multi-function arm moves up.

The drive switches off, but does not stop

in the tool change position.

Remedial action

 Set the rotary switch to 0/off.

 Move multi-function arm to posi-

tion 2.

 Switch on appliance (setting 1).

 Switch off appliance again.

Tool stops in tool change position.

Fault

Blender does not start working or stops

during use, the drive is “humming”.

Blade is blocked.

Remedial action

 Switch off the appliance and pull

out the mains plug.

 Detach the blender and remove

the obstruction.

 Re-attach the blender.

 Switch on the appliance.

Application examples

Whipped cream

200 g–1500 g

 Whip cream with the whisk for

1½ to 4 minutes at setting 7

(depending on the quantity and

properties of the cream).

 Follow instructions in the section

“Important information for using the

whisk” for adjusting the appliance

to the amounts to be processed!

Egg white

2 to 12 egg whites

 Beat egg white with the whisk

for 2 to 6 minutes at setting 7.

 Follow instructions in the section

“Important information for using the

whisk” for adjusting the appliance

to the amounts to be processed!

Risk of injury!

Before eliminating a fault, pull out the

mains plug.

Important information

If the fault cannot be eliminated, please

contact customer service.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch MUMXL Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info