Bedienungsanleitung Bosch MUZ9HA1 (Seite 13 von 125) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

765841

Zoom out

Zoom in

Vorherige Seite

1/125

Nächste Seite

Use

Note: The food is processed in different

ways depending on the application.

X “Preparation” see page 11

Recommended speeds

1-2 Use as whirl maker

1-2 Use as kebbe maker

3-4 Use as sausage filler

7Use as a meat mincer or pasta

maker

Not suitable for use with this

accessory!

The following example describes use of

the base attachment as a meat mincer:

W Risk of injury!

– Do not reach into the feed chute with

your hands.

– Only use the pusher when adding more

food.

Caution!

– Do not process bones, gristle, sinews or

other solid components.

– Do not process frozen meat.

– Do not apply great force with the pusher.

X Image sequence H

Important: Only prepare the base unit as

described in the main operating instructions.

1. Place the bevel gear on the main black

drive with the locking lever open as

shown.

Note: The bevel gear can also be fitted

rotated through 180° if you wish to work on

the left-hand side of the appliance.

2. Rotate the bevel gear in a clockwise

direction until it is securely fitted to the

main drive. Fully close the locking lever

to fix the bevel gear in position.

3. Position the prepared attachment on the

drive of the bevel gear, holding it at an

angle.

4. Turn the attachment anticlockwise until

you hear it click into position. The release

button must protrude from the bevel gear.

Caution!

– Check that the foot is at the right height.

– It should not be possible to turn the

attachment any further.

5. Attach the filling tray.

Caution!

Never use without the filling tray! The pusher

will otherwise block the worm gear and the

accessory damaged.

6. Prepare your food. Chop up large parts

beforehand so they fit into the feed chute

without having to press them in.

7. Plug the mains plug into the mains. Turn

the rotary switch to the recommended

setting.

8. Place a suitable container under the

attachment. Add the prepared food to the

filling tray.

9. Use the pusher to slide the food down

the feed chute, applying light pressure.

10. Once you have finished work, move the

rotary switch to y. Wait until the drive

comes to a standstill. Disconnect the

mains plug.

11. Remove the filling tray and pusher.

12. Hold down the release button and rotate

the attachment in a clockwise direction

until it disengages.

13. Remove the attachment and take apart.

14. Open the locking lever on the bevel gear.

Rotate the bevel gear in an anticlockwise

direction and remove.

Clean all parts directly after use.

X “Cleaning and maintenance” see

page 13

Cleaning and maintenance

The attachments and accessories used must

be thoroughly cleaned after each use.

Caution!

– Do not use any cleaning agents

containing alcohol or spirits.

– Do not use any sharp, pointed or metal

objects.

– Do not use abrasive cloths or cleaning

agents.

– Never clean the bevel gear under

running water or put in the dishwasher.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch MUZ9HA1 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info