Bedienungsanleitung Bosch PAS 12-27 (Seite 13 von 63) (Alle Sprachen)

544065

Zoom out

Zoom in

Vorherige Seite

1/63

Nächste Seite

English | 13

Bosch Power Tools 1 609 92A 0PY | (9.7.14)

Switching On and Off (PAS 11-21/PAS 12-27)

–To start the vacuum cleaner, set the On/Off switch 9 to po-

sition “I”.

–To switch off the vacuum cleaner, set the On/Off switch 9

to position “0”.

Switching On and Off (PAS 12-27 F)

–To start the vacuum cleaner, set the mode selector switch

9 to position “I”.

–To switch off the vacuum cleaner, set the mode selector

switch 9 to position “0”.

Operation with remote automatic switching (see figure B)

(PAS 12-27 F)

A socket outlet with earthing contact 3 is integrated in the

vacuum cleaner, which allows for connection of an external

power tool. The vacuum cleaner is automatically put into op-

eration via the power tool. Observe the maximal allowable

load of the connected power tool.

For connecting power tools, various hose systems are availa-

ble as accessories.

– Set the mode selector switch 9 to position “II”.

–To start the operation of the vac, switch on the power tool

connected to the socket 3. The vacuum cleaner starts au-

tomatically.

–To switch off the vac, switch off the power tool. The vacu-

um cleaner switches off automatically approx. 6 seconds

later.

Wet Vacuuming

 CAUTION! This appliance is not suitable for picking up

hazardous dust. Do not vacuum inflammable or explo-

sive fluids; for example, benzene, oil, alcohol, solvents.

Do not vacuum hot or burning dust. Do not operate the

machine in rooms where the danger of an explosion ex-

ists. The dusts, vapours or fluids can ignite or explode.

 The vacuum cleaner may not be used as a water pump.

The vacuum cleaner is intended for vacuuming air and wa-

ter mixtures.

 Before any work on the vacuum cleaner itself, pull the

mains plug.

Note: Before wet vacuuming, the dust bag 14 must be re-

moved and the container 5 must be emptied.

– The vacuum cleaner is equipped with a float 12. When the

maximum filling height is reached, the vacuum cleaner

switches off. Set the On/Off switch 9 to position “0” and

empty the container 5.

–After vacuuming, remove the permanent filter 11 to pre-

vent the forming of mould and allow it to dry thoroughly;

especially before using it for dry vacuuming.

Maintenance and Service

Maintenance and Cleaning

 Before any work on the vacuum cleaner itself, pull the

mains plug.

 For safe and proper working, always keep the vacuum

cleaner and ventilation slots clean.

If the replacement of the supply cord is necessary, this has to

be done by Bosch or an authorized Bosch service agent in or-

der to avoid a safety hazard.

Removing/Replacing the Permanent Filter (see figure C)

– To maintain the optimum performance of the vacuum

cleaner, clean the permanent filter 11 by brushing off or

rinsing with water after each use.

– The permanent filter 11 can be replaced, if required. Cut

through the band at the soiled permanent filter 11 and re-

move the inserted plastic basket 15. Press the plastic bas-

ket 15 firmly into the new permanent filter 11.

Container

– Wipe out the container 5 from time to time with a commer-

cially available, non-scouring cleaning agent and allow to

dry.

Malfunctions

In the case of insufficient vacuuming performance, check the

following:

– Is the vacuum lid 10 attached properly?

– Is the hose system clogged?

– Are the extension tubes connected firmly?

– Is the container 5 full?

– Is the dust bag 14 full?

– Is the permanent filter 11 clogged with dust?

Emptying at regular intervals ensures optimum vacuuming

performance.

If the vacuuming performance is not achieved thereafter, take

the vacuum cleaner to customer service.

After-sales Service and Application Service

In all correspondence and spare parts orders, please always

include the 10-digit article number given on the type plate of

the vacuum cleaner.

Our after-sales service responds to your questions concern-

ing maintenance and repair of your product as well as spare

parts. Exploded views and information on spare parts can al-

so be found under:

www.bosch-pt.com

Bosch’s application service team will gladly answer questions

concerning our products and their accessories.

Great Britain

Robert Bosch Ltd. (B.S.C.)

P.O. Box 98

Broadwater Park

North Orbital Road

Denham

Uxbridge

UB 9 5HJ

At www.bosch-pt.co.uk you can order spare parts or arrange

the collection of a product in need of servicing or repair.

Tel. Service: (0844) 7360109

E-Mail: boschservicecentre@bosch.com

OBJ_BUCH-860-007.book Page 13 Wednesday, July 9, 2014 12:46 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch PAS 12-27 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info