Bedienungsanleitung Bosch pbh 2900 fre (Seite 23 von 158) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

388876

Zoom out

Zoom in

Vorherige Seite

1/158

Nächste Seite

English | 23

Bosch Power Tools 1 609 929 T39 | (19.11.10)

Noise/Vibration Information

Measured sound values determined according

to EN 60745.

Typically the A-weighted noise levels of the

product are: Sound pressure level 89 dB(A);

Sound power level 100 dB(A). Uncertainty

K=3 dB.

Wear hearing protection!

Vibration total values (triax vector sum) deter-

mined according to EN 60745:

Hammer drilling into concrete: Vibrational emis-

sion value a

=16 m/s

, uncertainty K=1.5 m/s

Chiselling: Vibrational emission value

=14 m/s

, uncertainty K=1.5 m/s

Drilling in metal: Vibrational emission value

<2.5 m/s

, uncertainty K=1.5 m/s

Screwdriving without impact: Vibrational emis-

sion value a

<2.5 m/s

, uncertainty K=1.5 m/s

The vibration emission level given in this infor-

mation sheet has been measured in accordance

with a standardised test given in EN 60745 and

may be used to compare one tool with another.

It may be used for a preliminary assessment of

exposure.

The declared vibration emission level repre-

sents the main applications of the tool. However

if the tool is used for different applications, with

different accessories or poorly maintained, the

vibration emission may differ. This may signifi-

cantly increase the exposure level over the total

working period.

An estimation of the level of exposure to vibra-

tion should also take into account the times

when the tool is switched off or when it is run-

ning but not actually doing the job. This may sig-

nificantly reduce the exposure level over the to-

tal working period.

Identify additional safety measures to protect

the operator from the effects of vibration such

as: maintain the tool and the accessories, keep

the hands warm, organisation of work patterns.

Declaration of Conformity

We declare under our sole responsibility that

the product described under “Technical Data” is

in conformity with the following standards or

standardization documents: EN 60745 accord-

ing to the provisions of the directives

2004/108/EC, 2006/42/EC.

Technical file at:

Robert Bosch GmbH, PT/ESC,

D-70745 Leinfelden-Echterdingen

Robert Bosch GmbH, Power Tools Division

D-70745 Leinfelden-Echterdingen

Leinfelden, 19.11.2010

Assembly

f Before any work on the machine itself, pull

the mains plug.

Auxiliary Handle

f Operate your machine only with the auxilia-

ry handle 17.

Changing the position of the auxiliary handle

(see figure A)

The auxiliary handle 17 can be set to any posi-

tion for a secure and low-fatigue working pos-

ture.

– Turn the wing bolt for adjustment of the aux-

iliary handle 16 in anticlockwise direction

and set the auxiliary handle 17 to the re-

quired position. Then tighten the wing bolt

16 again in clockwise direction.

Dr. Egbert Schneider

Senior Vice President

Engineering

Dr. Eckerhard Strötgen

Head of Product

Certification

OBJ_BUCH-318-003.book Page 23 Friday, November 19, 2010 4:36 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch pbh 2900 fre Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info