Bedienungsanleitung Bosch PBH220RE (Seite 22 von 142) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

32137

Zoom out

Zoom in

Vorherige Seite

1/142

Nächste Seite

22 | English

1 619 929 804 | (16.10.07) Bosch Power Tools

Replacing the Drill Chuck

f Do not carry the power tool by the quick

change chuck.

To work with drilling tools without SDS-plus, a

keyless quick change chuck must be mounted.

Removing the Quick Change Chuck

(see figure C)

– Grasp the lock ring of the quick change

chuck 8 and pull it firmly in the direction of

the arrow. The quick change chuck is re-

leased and can be removed toward the front.

Inserting the Quick Change Chuck

(see figure D)

– Grasp the SDS-plus quick change chuck 4 or

the quick change keyless chuck 1 completely

with your hand. Slide the quick change chuck

with a turning motion onto the drill chuck

mounting 20 until a distinct latching noise is

heard.

– Check the latching by pulling the tool.

Changing the Tool

The dust protection cap 6 largely prevents the

entry of drilling dust into the tool holder during

operation. When inserting the tool, take care

that the dust protection cap 6 is not damaged.

f A damaged dust protection cap should be

changed immediately. We recommend hav-

ing this carried out by an after-sales serv-

ice.

Inserting SDS-plus Drilling Tools (see figure E)

The SDS-plus drill chuck allows for simple and

convenient changing of drilling tools without the

use of additional tools.

– Clean and lightly grease the shank end of the

tool.

– Insert the tool in a twisting manner into the

tool holder until it latches itself.

– Check the latching by pulling the tool.

As a requirement of the system, the SDS-plus

drilling tool can move freely. This causes a cer-

tain radial run-out at no-load, which has no ef-

fect on the accuracy of the drill hole, as the drill

bit centres itself upon drilling.

Removing SDS-plus Drilling Tools

(see figure F)

– Push back the locking sleeve 7 and remove

the tool.

Inserting Screwdriver Bits in a SDS-plus Quick

Change Chuck (see figure G)

To insert screwdriver bits, the SDS-plus adapter

21 must be used.

PBH 220 RE:

Inserting Drilling Tools without SDS-plus

(see figures H–I)

To work with tools without SDS-plus (e.g., drills

with cylindrical shank), a suitable drill chuck

must be mounted (key type drill chuck or key-

less chuck, accessories).

– Screw the SDS-plus adapter shank 24 into a

key type drill chuck 23. Secure the key type

drill chuck 23 with the securing screw 22.

Please observe that the securing screw has

a left-hand thread.

– Slide the quick change chuck with a turning

motion onto the drill chuck mounting 20 until

a distinct latching noise is heard.

– Check the latching by pulling the tool.

PBH 240 RE:

Inserting Drilling Tools without SDS-plus

(see figure K)

Note: Do not use tools without SDS-plus for

hammer drilling or chiselling! Tools without

SDS-plus and their drill chucks are damaged by

hammer drilling or chiselling.

– Insert a quick change chuck. (see Inserting

the Quick Change Chuck, page 22)

– Hold the retaining ring 3 of the quick change

keyless chuck. Open the tool holder by turn-

ing the front sleeve 2 until the drill bit can be

inserted.

–

Insert the drill bit.

– Hold the retaining ring 3 and firmly turn the

front sleeve2 in the direction of the arrow un-

til a latching noise can clearly be heard.

– Check the tight seating by pulling the tool.

OBJ_BUCH-495-002.book Page 22 Tuesday, October 16, 2007 3:09 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch PBH220RE Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch PBH220RE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info