Bedienungsanleitung Bosch PBH220RE (Seite 23 von 142) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

32137

Zoom out

Zoom in

Vorherige Seite

1/142

Nächste Seite

English | 23

Bosch Power Tools 1 619 929 804 | (16.10.07)

Note: If the tool holder was fully opened to the

stop, a functional ratching sound may be heard

during its next operation and the tool holder will

not close.

In this case, firstly turn the front sleeve 2 in the

opposite direction of the arrow shown in the fig-

ure. Afterwards, the tool holder can be closed

(tightened) again.

Screwdriver bits can be inserted either in com-

mercially available bit holders or directly in the

tool holder.

PBH 240 RE:

Removing Drilling Tools without SDS-plus

(see figure L)

– Firmly hold the retaining ring 3 of the quick

change chuck. Open the tool holder by turn-

ing the front sleeve 2 in the direction of the

arrow until the tool can be removed.

Dust/Chip Extraction

Dusts from materials such as lead-containing

coatings, some wood types, minerals and metal

can be harmful to one’s health. Touching or

breathing-in the dusts can cause allergic reac-

tions and/or lead to respiratory infections of the

user or bystanders.

Certain dusts, such as oak or beech dust, are

considered as carcinogenic, especially in con-

nection with wood-treatment additives (chro-

mate, wood preservative). Materials containing

asbestos may only be worked by specialists.

– Use dust extraction whenever possible.

– Provide for good ventilation of the working

place.

– It is recommended to wear a P2 filter-class

respirator.

Observe the relevant regulations in your country

for the materials to be worked.

Mounting the Dust Extraction Attachment

(see figure M)

For dust extraction, the dust extraction attach-

ment (accessory) is required. When drilling, the

dust extraction attachment retracts so that the

attachment head is always close to the surface

at the drill hole.

– Loosen the wing bolt for depth stop adjust-

ment 19 and remove the depth stop 9.

– Insert the dust extraction attachment and

tighten the wing bolt again.

– Connect an extraction hose (diameter

19 mm, accessory) to the extraction sleeve

25 of the dust extraction attachment.

The vacuum cleaner must be suitable for the ma-

terial being worked.

When vacuuming dry dust that is especially det-

rimental to health or carcinogenic, use a special

vacuum cleaner.

Adjusting the Drilling Depth on the Dust Ex-

traction Attachment (see figure N)

The required drilling depth X can also be adjust-

ed when the dust extraction attachment is

mounted.

Only for SDS-plus drilling tools:

Insert the SDS-plus drilling tool to the stop into

the SDS-plus tool holder 5. Otherwise, the mov-

ability of the SDS-plus drilling tool can lead to

incorrect adjustment of the drilling depth.

– Loosen the wing bolt 29 on the dust extrac-

tion attachment.

– Without switching the power tool on, apply it

firmly to the drilling location. The SDS-plus

drilling tool must face against the surface.

– Position the the guide pipe 30 of the dust ex-

traction attachment in its holding fixture in

such a manner that the head of the dust ex-

traction attachment faces against the surface

to be drilled. Do not slide the guide pipe 30

further over the telescopic pipe 28 of the

dust extraction attachment than required, so

that as much as possible of the scale 28 on

the telescopic pipe remains visible.

– Retighten the wing bolt 29 again. Loosen the

clamping screw

26 on the depth stop of the

dust extraction attachment.

– Move the depth stop 27 on the telescopic

pipe 28 in such a manner that the

clearance X shown in the figure corresponds

with the required drilling depth.

– Tighten the clamping screw 26 in this posi-

tion.

OBJ_BUCH-495-002.book Page 23 Tuesday, October 16, 2007 3:09 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch PBH220RE Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch PBH220RE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info