Bedienungsanleitung Bosch PCL 10 (Seite 11 von 57) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

97310

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

English | 11

Bosch Power Tools 1 609 929 R04 | (13.6.08)

Technical Data

Assembly

Inserting/Replacing the Battery

Use only alkali-manganese batteries.

To open the battery lid 5, press on the latch 4 and

fold the battery lid up. Insert the batteries. When

inserting, pay attention to the correct polarity

according to the representation on the inside of

the battery compartment.

Always replace all batteries at the same time.

Only use batteries from one brand and with the

identical capacity.

f Remove the batteries from the measuring

tool when not using it for extended periods.

When storing for extended periods, the bat-

teries can corrode and discharge themselves.

Operation

Initial Operation

f Protect the measuring tool against moisture

and direct sun irradiation.

f Do not subject the measuring tool to extreme

temperatures or variations in temperature.

As an example, do not leave it in vehicles for

longer periods. In case of large variations in

temperature, allow the measuring tool to ad-

just to the ambient temperature before putting

it into operation.

f Avoid heavy impact to or falling down of the

measuring tool. Damage to the measuring

tool can impair its accuracy. After heavy im-

pact or shock, compare the laser line with a

known horizontal or vertical reference line.

f Switch the measuring tool off during trans-

port. When switching off, the levelling unit,

which can be damaged in case of intense

movement, is locked.

Switching On and Off

To switch on the measuring tool, push the

On/Off switch 3 to the “On” position. Imme-

diately after switching on, the measuring tool

sends two laser beams out of the exit opening 1.

f Do not point the laser beam at persons or

animals and do not look into the laser beam

yourself, not even from a large distance.

To switch off the measuring tool, push the

On/Off switch 3 to the “Off” position. When

switching off, the levelling unit is locked.

f Do not leave the switched on measuring tool

unattended and switch the measuring tool

off after use. Other persons could be blinded

by the laser beam.

Cross-line Laser PCL 10

Article number

3 603 K08 1..

Working range to approx.

10 m

Levelling accuracy

± 0.5 mm/m

Self-levelling range,

typically

±4°

Levelling duration, typically

Operating temperature

+5 °C ... +40 °C

Storage temperature

–20 °C ... +70 °C

Relative air humidity, max.

90 %

Laser class

Laser type

635 nm, <1 mW

>10

Tripod mount

1/4"

Batteries

2x1.5VLR6(AA)

Operating life time, approx.

15 h

Weight according to

EPTA-Procedure 01/2003 0.4 kg

Dimensions

108 x 66 x 92 mm

Please observe the article number on the type plate of

your measuring tool. The trade names of the individual

measuring tools may vary.

OBJ_BUCH-693-002.book Page 11 Friday, June 13, 2008 2:17 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch PCL 10 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info