Bedienungsanleitung Bosch PCL 10 (Seite 12 von 57) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

97310

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

1 609 929 R04 | (13.6.08) Bosch Power Tools

12 | English

Working with Automatic Levelling

(see figures A–B)

Position the measuring tool on a level and firm

support, hold it by the contact surfaces 6 against

a vertical surface or attach it to a tripod 11.

After switching on, the levelling function auto-

matically compensates irregularities within the

self-levelling range of

± 4°. The levelling is fin-

ished as soon as the laser beams do not move

any more. The indicator 2 lights up green.

If the automatic levelling function is not possible,

e. g. because the surface on which the measuring

tool stands deviates by more than 4° from the

horizontal plane, the indicator 2 lights up red and

the laser is automatically switched off. In this

case, bring the measuring tool to the level posi-

tion or hold it by the contact surfaces 6 straightly

against a vertical surface, and wait for the self-

levelling to take place. As soon as the measuring

tool is within the self-levelling range of

±4° again,

the indicator 2 lights up green and the laser

beams are switched on.

When not within the self-levelling range of

± 4°,

working with the measuring tool is not possible,

because it cannot be assured that the laser

beams run at a right angle to each other.

In case of ground vibrations or position changes

during operation, the measuring tool is auto-

matically levelled in again. To avoid errors, check

the position of the horizontal and vertical laser

line with regard to the reference points upon

re-levelling.

Working Advice

Working with the Tripod (see figure C)

A tripod 11 offers a stable, height-adjustable

measuring support. Place the measuring tool via

the tripod mount 8 onto the 1/4" male thread of

the tripod and screw the locking screw of the

tripod tight.

Holding Laterally against a Wall or Object

(see figure D)

For quick checking of heights, the measuring tool

can be held by the contact surfaces 6 laterally

against a vertical wall, cabinets, etc. Take care to

hold the measuring tool straightly and calmly.

Laser viewing glasses (Accessory)

The laser viewing glasses filter out the ambient

light. This makes the red light of the laser appear

brighter for the eyes.

f Do not use the laser viewing glasses as

safety goggles. The laser viewing glasses are

used for improved visualisation of the laser

beam, but they do not protect against laser

radiation.

f Do not use the laser viewing glasses as sun

glasses or in traffic. The laser viewing glasses

do not afford complete UV protection and

reduce colour perception.

Maintenance and Service

Maintenance and Cleaning

Store and transport the measuring tool only in

the supplied protective case.

Keep the measuring tool clean at all times.

Do not immerse the measuring tool into water or

other fluids.

Wipe off debris using a moist and soft cloth. Do

not use any cleaning agents or solvents.

Regularly clean the surfaces at the exit opening

of the laser in particular, and pay attention to any

fluff of fibres.

If the measuring tool should fail despite the care

taken in manufacturing and testing procedures,

repair should be carried out by an authorized af-

ter-sales service centre for Bosch power tools.

In all correspondence and spare parts orders,

please always include the 10-digit article number

given on the type plate of the measuring tool.

In case of repairs, send in the measuring tool

packed in its protective case 9.

OBJ_BUCH-693-002.book Page 12 Friday, June 13, 2008 2:17 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch PCL 10 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info