Bedienungsanleitung Bosch PCM 7 (Seite 28 von 346) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

544038

Zoom out

Zoom in

Vorherige Seite

1/346

Nächste Seite

28 | English

1 609 929 U75 | (19.7.10) Bosch Power Tools

Assembly

f Avoid unintentional starting of the ma-

chine. During assembly and for all work on

the machine, the power plug must not be

connected to the mains supply.

Delivery Scope

Please also observe the represen-

tation of the delivery scope at the

beginning of the operating instruc-

tions.

Before starting the operation of the machine for

the first time, check if all parts listed below have

been supplied:

– Chop and mitre saw with mounted saw blade

– Dust bag 18

– Material clamp 14

– Allen key 22

– Batteries (2x, size LR03, 1,5 V)

Note: Check the power tool for possible dam-

age.

Before further use of the machine, check that all

protective devices are fully functional. Any light-

ly damaged parts must be carefully checked to

ensure flawless operation of the tool. All parts

must be properly mounted and all conditions

fulfilled that ensure faultless operation.

Damaged protective devices and parts must be

immediately replaced by an authorised service

centre.

Additionally required tools (not in delivery

scope):

– Phillips screwdriver

Mounting to a Working Surface

(see figure A)

f To ensure safe handling, the machine must

be mounted on a level and stable surface

(e. g., workbench) prior to using.

– Carefully remove all parts included in the de-

livery from their packaging.

– Remove all packaging material from the ma-

chine and the accessories provided.

– Fasten the power tool with suitable screw

fasteners to the working surface. The holes

12 serve for this purpose.

Inserting the Batteries (see figure B)

– Open the battery compartment 29.

– Insert the batteries provided according to

the specified polarity.

– Close the battery compartment.

Dust/Chip Extraction

Dusts from materials such as lead-containing

coatings, some wood types, minerals and metal

can be harmful to one’s health. Touching or

breathing-in the dusts can cause allergic reac-

tions and/or lead to respiratory infections of the

user or bystanders.

Certain dusts, such as oak or beech dust, are

considered as carcinogenic, especially in con-

nection with wood-treatment additives (chro-

mate, wood preservative). Materials containing

asbestos may only be worked by specialists.

– Always use dust extraction.

– Provide for good ventilation of the working

place.

– It is recommended to wear a P2 filter-class

respirator.

Observe the relevant regulations in your country

for the materials to be worked.

The dust/chip extraction can be blocked by

dust, chips or workpiece fragments.

– Switch the machine off and pull the mains

plug from the socket outlet.

– Wait until the saw blade has come to a com-

plete stop.

– Determine the cause of the blockage and cor-

rect it.

Integrated Dust Extraction (see figure C)

– Mount the dust bag 18 onto the sawdust

ejector 21.

During sawing, the dust bag must never come in-

to contact with the movable machine parts.

Always empty the dust bag in good time.

OBJ_BUCH-880-004.book Page 28 Monday, July 19, 2010 11:56 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch PCM 7 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info