Bedienungsanleitung Bosch PDR 18 LI (Seite 12 von 179) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

708153

Zoom out

Zoom in

Vorherige Seite

1/179

Nächste Seite

12 | English

1 609 92A 49G | (07.09.2018) Bosch Power Tools

Service

u Have your power tool serviced by a qualified repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained.

u Never service damaged battery packs. Service of bat-

tery packs should only be performed by the manufacturer

or authorized service providers.

Safety Warnings for Screwdrivers

u Hold the power tool by insulated gripping surfaces,

when performing an operation where the fastener

may contact hidden wiring. Fasteners contacting a "live"

wire may make exposed metal parts of the power tool

"live" and could give the operator an electric shock.

u Use suitable detectors to determine if there are hid-

den supply lines or contact the local utility company

for assistance. Contact with electric cables can cause

fire and electric shock. Damaging gas lines can lead to ex-

plosion. Breaking water pipes causes property damage.

u Hold the power tool securely. When tightening and

loosening screws be prepared for temporarily high torque

reactions.

u Secure the workpiece. A workpiece clamped with

clamping devices or in a vice is held more secure than by

hand.

u Always wait until the power tool has come to a com-

plete stop before placing it down. The application tool

can jam and cause you to lose control of the power tool.

u In case of damage and improper use of the battery, va-

pours may be emitted. Ensure the area is well-ventilated

and seek medical attention should you experience any ad-

verse effects. The vapours may irritate the respiratory

system.

u Do not open the battery. There is a risk of short-circuit-

ing.

u The battery can be damaged by pointed objects such

as nails or screwdrivers or by force applied externally.

An internal short circuit may occur, causing the battery to

burn, smoke, explode or overheat.

u Only use the battery with products from the manufac-

turer. This is the only way in which you can protect the

battery against dangerous overload.

Protect the battery against heat, e.g.

against continuous intense sunlight, fire,

water, and moisture. There is a risk of explo-

sion.

Product Description and

Specifications

Read all the safety and general instructions.

Failure to observe the safety and general in-

structions may result in electric shock, fire

and/or serious injury.

Please observe the illustrations at the beginning of this oper-

ating manual.

Intended Use

The machine is intended for driving in and loosening screws

and bolts as well as for tightening and loosening nuts within

the respective range of dimension.

Product features

The numbering of the product features refers to the diagram

of the power tool on the graphics page.

(1)

Tool holder

(2)

Locking sleeve

(3)

Battery release button

(4)

Battery

(5)

Rotational direction switch

(6)

On/off switch

(7)

Handle (insulated gripping surface)

(8)

Screwdriver bit with ball catch

(9)

Screwdriver bit

(10)

Universal bit holder

Accessories shown or described are not included with the

product as standard. You can find the complete selection of

accessories in our accessories range.

Technical data

Cordless impact screw-

driver

PDR 18 LI

Article number

3 603 J80 3..

Rated voltage V= 18

No-load speed rpm 0–2 600

Impact rate rpm 0–3 200

Maximum torque, hard

screwdriving application ac-

cording to ISO5393

Nm 130

Machine screw diameter M4–M14

Screw diameter max. mm 8

Tool holder ¼"internal

hexagon

Weight according to

EPTA Procedure 01:2014

kg 1.3

Permitted ambient temperature

– during charging °C 0... +45

– during operation

and

during storage

°C -20... +50

Recommended batteries PBA 18V.. ..V-.

Recommended chargers AL 18.. CV

AL 22.. CV

A) Limited performance at temperatures <0°C

Noise/vibration information

Noise emission values determined according to

EN 62841-2-2.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch PDR 18 LI Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info