Bedienungsanleitung Bosch PFS 2000 (Seite 23 von 303) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch)

766889

Zoom out

Zoom in

Vorherige Seite

1/303

Nächste Seite

English | 23

– Remove the suction tube(13) with the container

seal(17) and rinse it thoroughly.

Reattach the suction tube(13) with the container

seal(17) to the spray gun.

– Fill the container(7) with warm water and fit it to the

spray gun(1)again.

– Connect the air hose(20) to the spray gun(1)again.

– Spray until only clear water comes out. You may have to

fill the container with warm water again.

– Remove the air hose(20) from both the base unit(22)

and the spray gun(1).

– Clean the base unit if necessary with a moistened cloth

and then remove the base unit(22) and the air hose(20)

from the immediate cleaning environment.

– Remove the cap nut(3), the air cap(2), the gasket(12),

the nozzle cap used(10)/(9) with the O-ring(11) and the

suction tube(13) with the container seal(17).

When doing so, ensure that the O-ring(11) remains on

the nozzle cap.

– Clean all paint-carrying parts in a bucket with warm water

using a commercially available washing-up brush. Also

clean the paint channel(19) of the spray gun(1).

– Check that the suction tube(13) and the container

seal(17) are free of spray material and undamaged.

If required, clean the container seal(17) again with warm

water.

– Clean the ventilation hole (18) using a suitable object.

–PFS2000: If required, clean the filling sieve(14) thor-

oughly with warm water.

– Clean the outside of the container(7) and the spray

gun(1)with a damp cloth.

– Allow all components to dry thoroughly before assem-

bling them.

– Reassemble the fine-spray system in reverse order.

Slide the container seal(17) upwards again into the

groove of the suction tube(13).

Ensure that the container seal is positioned precisely all

around in the suction tube groove in order to seal the

spray gun correctly.

Make sure that you slide the suction tube(13) all the way

back onto the paint channel(19).

Cleaning After Using Solvent-Based Paints (see figureK)

Always clean the spray gun and the container for the spray

material with the respective diluting agent for the spray ma-

terial being used.

Never clean the nozzle and air holes in the spray gun with

pointed objects.

Wear suitable gloves during cleaning work involving solvents

and solvent-based paints.

– Switch off the base unit(22) and remove the air

hose(20) from the spray gun(1).

– Clean the base unit if necessary with a cloth moistened

with diluting agent and then remove the base unit(22)

and the air hose(20) from the immediate cleaning envir-

onment.

– Remove the container(7) from the spray gun(1).

Hold the container(7) underneath the suction tube(13)

and pull the trigger switch(6) on the spray gun so that the

spray material can flow back into the container.

– Empty the container(7).

The spray material can be stored in an airtight, sealed

paint container for other applications. Use the spare

container(8) with cover or the original spray material

container, for example, for this purpose.

– Clean the container(7).

– Remove the suction tube(13) with the container

seal(17) and rinse it thoroughly.

Reattach the suction tube(13) with the container

seal(17) to the spray gun.

– Fill the container(7) halfway with solvent and fit it to the

spray gun(1)again.

– Shake the spray gun several times.

Make sure that you do not spray the diluting agent. There

is a risk of explosion.

– Remove the container(7) from the spray gun(1)and

empty it completely into a sealable material tin.

– Remove the cap nut(3), the air cap(2), the gasket(12),

the nozzle cap used(10)/(9) with the O-ring(11) and the

suction tube(13) with the container seal(17).

When doing so, ensure that the O-ring(11) remains on

the nozzle cap.

– Clean all paint-carrying parts in a bucket with diluting

agent using a commercially available washing-up brush.

Also clean the paint channel(19) of the spray gun(1).

– Check that the suction tube(13) and the container

seal(17) are free of spray material and undamaged.

If required, clean the container seal(17) again with dilut-

ing agent.

– Clean the ventilation hole (18) using a suitable object.

–PFS2000: If required, clean the filling sieve(14) thor-

oughly with diluting agent.

– Clean the outside of the container(7) and the spray

gun(1)with a cloth moistened in diluting agent.

– Allow all components to dry thoroughly before assem-

bling them.

– Reassemble the fine-spray system in reverse order.

Slide the container seal(17) upwards again into the

groove of the suction tube(13).

Ensure that the container seal is positioned precisely all

around in the suction tube groove in order to seal the

spray gun correctly.

Make sure that you slide the suction tube(13) all the way

back onto the paint channel(19).

Material Disposal

Contaminated diluting agent, remnants of spray material

and, if applicable, remnants of diluting agent must be dis-

posed of properly and in an environmentally friendly man-

ner. Observe the manufacturer's disposal information and

the local regulations for disposal of hazardous waste.

Bosch Power Tools 1 609 92A 687 | (16.09.2021)

Bosch PFS 2000 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info