Bedienungsanleitung Bosch PFZ 500 E (Seite 13 von 92) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

110121

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

English | 13

Bosch Power Tools 1 609 929 N70 | (22.1.08)

4) Power tool use and care

a) Do not force the power tool. Use the cor-

rect power tool for your application. The

correct power tool will do the job better

and safer at the rate for which it was de-

signed.

b) Do not use the power tool if the switch

does not turn it on and off. Any power tool

that cannot be controlled with the switch

is dangerous and must be repaired.

c) Disconnect the plug from the power

source and/or the battery pack from the

power tool before making any adjust-

ments, changing accessories, or storing

power tools. Such preventive safety meas-

ures reduce the risk of starting the power

tool accidentally.

d) Store idle power tools out of the reach of

children and do not allow persons unfa-

miliar with the power tool or these in-

structions to operate the power tool.

Power tools are dangerous in the hands of

untrained users.

e) Maintain power tools. Check for misalign-

ment or binding of moving parts, break-

age of parts and any other condition that

may affect the power tool’s operation. If

damaged, have the power tool repaired

before use. Many accidents are caused by

poorly maintained power tools.

f) Keep cutting tools sharp and clean. Prop-

erly maintained cutting tools with sharp

cutting edges are less likely to bind and are

easier to control.

g) Use the power tool, accessories and tool

bits etc. in accordance with these instruc-

tions, taking into account the working

conditions and the work to be performed.

Use of the power tool for operations differ-

ent from those intended could result in a

hazardous situation.

5) Service

a) Have your power tool serviced by a quali-

fied repair person using only identical re-

placement parts. This will ensure that the

safety of the power tool is maintained.

Machine-specific

Safety Warnings

f Keep hands away from the sawing range. Do

not reach under the workpiece. Contact with

the saw blade can lead to injuries.

f Apply the machine to the workpiece only

when switched on. Otherwise there is danger

of kickback when the cutting tool jams in the

workpiece.

f When the cut is completed, switch off the

machine and then pull the saw blade out of

the cut only after it has come to a standstill.

In this manner you can avoid kickback and can

place down the machine securely.

f Use only sharp, flawless saw blades. Bent or

unsharp saw blades can break or cause kick-

back.

f Do not brake the saw blade to a stop by ap-

plying side pressure after switching off. The

saw blade can be damaged, break or cause

kickback.

f Clamp material well. Do not support the

workpiece with your hand or foot. Do not

touch objects or the floor with the the saw

running. Danger of kickback.

f Use suitable detectors to determine if utility

lines are hidden in the work area or call the

local utility company for assistance. Contact

with electric lines can lead to fire and electric

shock. Damaging a gas line can lead to explo-

sion. Penetrating a water line causes property

damage or may cause an electric shock.

f Hold the power tool only by the insulated

gripping surfaces when performing an oper-

ation where the cutting tool may contact hid-

den wiring or its own cord. Contact with a

“live” wire will also make exposed metal parts

of the power tool “live” and shock the opera-

tor.

f When working with the machine, always

hold it firmly with both hands and provide

for a secure stance. The power tool is guided

more secure with both hands.

f Secure the workpiece. A workpiece clamped

with clamping devices or in a vice is held more

secure than by hand.

OBJ_BUCH-105-002.book Page 13 Tuesday, January 22, 2008 1:30 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch PFZ 500 E Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info