Bedienungsanleitung Bosch PFZ 500 E (Seite 15 von 92) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

110121

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

English | 15

Bosch Power Tools 1 609 929 N70 | (22.1.08)

tool is used for different applications, with differ-

ent accessories or poorly maintained, the vibra-

tion emission may differ. This may significantly

increase the exposure level over the total work-

ing period.

An estimation of the level of exposure to vibra-

tion should also take into account the times

when the tool is switched off or when it is run-

ning but not actually doing the job. This may sig-

nificantly reduce the exposure level over the total

working period.

Identify additional safety measures to protect the

operator from the effects of vibration such as:

maintain the tool and the accessories, keep the

hands warm, organisation of work patterns.

Declaration of Conformity

We declare under our sole responsibility that the

product described under “Technical Data” is in

conformity with the following standards or

standardization documents: EN 60745 according

to the provisions of the directives 2004/108/EC,

98/37/EC (until Dec. 28, 2009), 2006/42/EC

(from Dec. 29, 2009 on).

Technical file at:

Robert Bosch GmbH, PT/ESC,

D-70745 Leinfelden-Echterdingen

11.12.2007, Robert Bosch GmbH, Power Tools Division

D-70745 Leinfelden-Echterdingen

Assembly

Replacing/Inserting the Saw Blade

f Before any work on the machine itself, pull

the mains plug.

f When mounting the saw blade, wear protec-

tive gloves. Danger of injury when touching

the saw blade.

f When changing the saw blade, take care that

the saw blade holder is free of material resi-

due, e. g. wood or metal shavings.

Selecting a Saw Blade

Use only saw blades suitable for the material be-

ing worked.

An overview of recommended saw blades can be

found at the end of this manual. Use only saw

blades with M-shank.

Inserting the Saw Blade (see figure A)

Insert the saw blade 1 until it latches in the SDS

saw blade receptacle 6.

f Check the tight seating of the saw blade. A

loose saw blade can fall out and lead to inju-

ries.

Removing the Saw Blade (see figure B)

Push the slider for the SDS saw blade release 7

in the direction of the arrow and pull out the saw

blade 1.

Dust/Chip Extraction

f Dusts from materials such as lead-containing

coatings, some wood types, minerals and

metal can be harmful to one’s health. Touch-

ing or breathing-in the dusts can cause aller-

gic reactions and/or lead to respiratory infec-

tions of the user or bystanders.

Certain dusts, such as oak or beech dust, are

considered as carcinogenic, especially in con-

nection with wood-treatment additives (chro-

mate, wood preservative). Materials contain-

ing asbestos may only be worked by

specialists.

– Provide for good ventilation of the working

place.

– It is recommended to wear a P2 filter-class

respirator.

Observe the relevant regulations in your coun-

try for the materials to be worked.

Dr. Egbert Schneider

Senior Vice President

Engineering

Dr. Eckerhard Strötgen

Head of Product

Certification

OBJ_BUCH-105-002.book Page 15 Tuesday, January 22, 2008 1:30 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch PFZ 500 E Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info