Bedienungsanleitung Bosch PIP875N17V (Seite 10 von 20) (Englisch)

630334

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Flexible zone

This may be used as a single zone or two individual zones

depending on the cooking needs in each situation.

It consists of 4 independently-controlled inductors. When the

flexible zone is working, only the zone covered by the cookware

is activated.

Advice on using cookware

To ensure that the cookware is detected and heat is distributed

evenly, correctly centre the cookware:

Warnings

When using cookware of a different size or made of a different

material, noise and vibrations that do not affect the correct

working of the zone may occur.

As one hotplate

The flexible zone is normally used as one single hotplate.

How to activate

The hob must be switched on.

1. Select the flexible zone with the Á or Â symbol. The

indicator

‹.‹ lights up.

2. Select the power level in the programming zone.

The flexible zone is switched on.

Changing the power level

Change the desired power level in the programming zone.

Adding more cookware

Select the flexible zone then press and hold the

Ä symbol until

the cookware is detected. The previously selected power level

is maintained.

Note: If the pan on the hotplate that is switched on is moved or

removed, the hob will perform an automatic search and the

previously selected power level will be maintained.

To deactivate

Select the hotplate and press the 0 symbol.

As two hotplates

The flexible zone can be used as two independent hotplates.

How to activate

The hob must be switched on.

1. Select the flexible zone then press the Ã symbol.

The indicator

b lights up between the Á and Â symbols.

2. Select one of the hotplates in the flexible zone. The indicator

‹.‹ lights up.

3. Select the power level in the programming zone.

How to deactivate

Select the hotplate and press the 0 symbol. The hotplate

switches off.

Note: When a hob is switched off and switched on again, the

flexible zone returns to being one single hotplate.

As one hotplate

Diameter less than or equal to 13 cm

Place the cookware on one of the four posi-

tions shown in the image.

Diameter greater than 13 cm

Place the cookware on one of the three

positions shown in the image.

If the cookware takes up more than one hot-

plate, place it at the top or bottom edge of

the flexible zone.

As two independent hotplates

The front and back hotplates, each with two

inductors, can be used independently by

selecting the necessary power for each

one. In this case, it is recommended to only

use one pan on each hotplate.

To obtain maximum power with the

Powerboost Function, place the

cookware in the centre of the flexi-

ble zone when used as a single hot-

plate.

On hobs with more than one flexible

zone, it is not recommended to use

several zones at the same time for a

single pan.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch PIP875N17V Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch PIP875N17V

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info