Bedienungsanleitung Bosch PKS 40 (Seite 24 von 151) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

110140

Zoom out

Zoom in

Vorherige Seite

1/151

Nächste Seite

24 | English

1 609 929 N78 | (7.2.08) Bosch Power Tools

– With the Allen key 3, tighten the clamping

bolt 18 turning in rotation direction o. The

tightening torque is between 6–9 Nm, which

corresponds to hand tight plus

¼ turn.

Adjusting the Riving Knife

(see figure B)

f Before any work on the machine itself, pull

the mains plug.

f Always work with the riving knife, except

when carrying out plunge cuts. The riving

knife prevents jamming of the saw blade

while sawing.

Adjustment is carried out at maximum cutting

depth, see Section “Adjusting the Cutting

Depth”.

Loosen screw 24, adjust the riving knife 12 to

the measure shown in the figure and tighten

screw 24 with a tightening torque between

3.5–5 Nm.

Dust/Chip Extraction

f Before any work on the machine itself, pull

the mains plug.

f Dusts from materials such as lead-containing

coatings, some wood types, minerals and

metal can be harmful to one’s health. Touch-

ing or breathing-in the dusts can cause aller-

gic reactions and/or lead to respiratory infec-

tions of the user or bystanders.

Certain dusts, such as oak or beech dust, are

considered as carcinogenic, especially in

connection with wood-treatment additives

(chromate, wood preservative). Materials

containing asbestos may only be worked by

specialists.

– Use dust extraction whenever possible.

– Provide for good ventilation of the work-

ing place.

– It is recommended to wear a P2 filter-

class respirator.

Observe the relevant regulations in your

country for the materials to be worked.

External Dust Extraction

Mount the vacuum hose 29 (accessory) on to

the saw dust ejector 17. Connect the vacuum

hose 29 to a vacuum cleaner (accessory). An

overview for connecting to various vacuum

cleaners can be found at the end of this manual.

The machine can be plugged directly into the re-

ceptacle of a Bosch all-purpose vacuum cleaner

with remote starting control. The vacuum clean-

er starts automatically when the machine is

switched on.

The vacuum cleaner must be suitable for the ma-

terial being worked.

When vacuuming dry dust that is especially det-

rimental to health or carcinogenic, use a special

vacuum cleaner.

Integrated Dust Extraction with Dust Bag

For smaller jobs, a dust bag (accessory) can be

mounted. Insert the dust bag sleeve firmly into

the saw dust ejector 17. Empty the dust bag at

regular intervals to maintain optimum dust col-

lection.

Operation

Operating Modes

f Before any work on the machine itself, pull

the mains plug.

Adjusting the Cutting Depth (see figure C)

f Adjust the cutting depth to the thickness of

the workpiece. Less than a full tooth of the

blade teeth should be visible below the work-

piece.

Loosen wing bolt 14. For a smaller cutting

depth, pull the saw away from the base plate 13;

for a larger cutting depth, push the saw toward

the base plate 13. Adjust the desired cutting

depth at the cutting-depth scale. Tighten wing

bolt 14 again.

Adjusting the Cutting Angle

Loosen wing bolt 6. Tilt the saw sidewards. Ad-

just the desired setting at the scale 5. Tighten

wing bolt 6 again.

OBJ_BUCH-179-003.book Page 24 Thursday, February 7, 2008 9:51 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch PKS 40 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch PKS 40

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info