Bedienungsanleitung Bosch PMF 10.8 LI (Seite 17 von 117) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

591462

Zoom out

Zoom in

Vorherige Seite

1/117

Nächste Seite

English | 17

Bosch Power Tools 1 609 92A 0SE | (30.10.14)

Mounting/Replacing the Application Tool/Accessory

If required, remove an already mounted application tool/

accessory.

For removing the application tool/accessory loosen the screw

10 with the hex key 11 and remove the tool.

Mount the application tool/accessory (e.g. plunge cut saw

blade 9) in such a way on the tool holder 7 that the openings

of the tool engage into the cams of the tool holder.

For a safe and fatigue-free working position it is possible to

position the application tools/accessories in any snap-in posi-

tions on the tool holder. Position the tool in such a way that

the depressed centre points downwards (marking on the tool

is readable from above, see figure on the graphics page).

Use the screw 10 to fasten the application tool/accessory.

Tightly fasten the screw 10 with the hex key 11.

 Check the tight seating of the application tool/accesso-

ry. Incorrect or not securely fastened application tools/ac-

cessories can come loose during operation and pose a haz-

ard.

Mounting/Replacing a Sanding Sheet on the Sanding

Plate

The sanding plate 12 is fitted with Velcro backing for quick

and easy fastening of sanding sheets with Velcro adhesion.

Before attaching the sanding sheet 13, free the Velcro back-

ing of the sanding plate 12 from any debris by tapping against

it in order to enable optimum adhesion.

Position the sanding sheet 13 flush alongside one edge of the

sanding plate 12, then lay the sanding sheet onto the sanding

plate and press firmly.

To ensure optimum dust extraction, pay attention that the

punched holes in the sanding sheet match with the holes in

the sanding plate.

To remove the sanding sheet 13, grasp it at one of the tips and

pull it off from the sanding plate 12.

You can use all sanding sheets, fleece pads/polishing cloth

pads of the Delta 93 mm series of Bosch accessory program.

Sanding accessories, such as fleece pads/polishing cloth

pads, are attached to the sanding plate in the same manner.

HM-Riff segment

saw blade

Grouting joints, soft wall

tiles, glass-fibre reinforces

plastic and other abrasive

materials

Cutting and separating close to edges, in corners or hard to

reach areas;

example: removing grouting joints between wall tiles for

repair work, cutting openings in tiles, gypsum boards or

plastic

HM-Riff delta plate

Mortar, concrete remain-

ders, wood, abrasive ma-

terials

Rasping and sanding on hard surfaces;

example: removing mortar or tile adhesive (e.g. when

replacing damaged tiles)

HM-Riff grout and

mortar remover

Mortar, grouting joints,

epoxy resin, glass-fibre re-

inforces plastic and other

abrasive materials

Removing grouting joints from wall and floor tiles as well as

removing mortar and joint adhesive (also in right-angled

corners)

Scraper, rigid

Carpets, coverings Scraping on hard surfaces;

example: removing carpet and tile adhesive

BIM serrated seg-

ment saw blade

Insulation material, insula-

tion panels, floor panels,

sound insulation panels,

cardboard, carpet, rub-

ber, leather

Cutting soft materials

Accessory Material Application

OBJ_BUCH-1170-005.book Page 17 Thursday, October 30, 2014 8:12 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch PMF 10.8 LI Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info