Bedienungsanleitung Bosch PMF 190 E (Seite 13 von 90) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

508454

Zoom out

Zoom in

Vorherige Seite

1/90

Nächste Seite

English | 13

Bosch Power Tools 2 609 005 779 | (21.2.12)

f Products sold in GB only: Your product is fitted with an

BS 1363/A approved electric plug with internal fuse (ASTA

approved to BS 1362).

If the plug is not suitable for your socket outlets, it should be

cut off and an appropriate plug fitted in its place by an au-

thorised customer service agent. The replacement plug

should have the same fuse rating as the original plug.

The severed plug must be disposed of to avoid a possible

shock hazard and should never be inserted into a mains

socket elsewhere.

Products sold in AUS and NZ only: Use a residual current

device (RCD) with a rated residual current of 30 mA or less.

Product Description and

Specifications

Read all safety warnings and all instruc-

tions. Failure to follow the warnings and in-

structions may result in electric shock, fire

and/or serious injury.

Intended Use

The machine is intended for sawing and cutting wooden mate-

rials, plastic, gypsum, non-ferrous metals and fastening ele-

ments (e.g., unhardened nails, staples). It is also suitable for

working soft wall tiles, as well as for dry sanding and scraping

of small surfaces. It is especially suitable for working close to

edges and for flush cutting. Operate the power tool exclusive-

ly with Bosch accessories.

Product Features

The numbering of the product features refers to the illustra-

tion of the machine on the graphics page.

1 On/Off switch

2 Thumbwheel for orbit frequency preselection

3 Venting slots

4 Handle (insulated gripping surface)

5 Tool holder

6 Plunge saw blade

7 Clamping bolt with washer

8 Allen key

9 Sanding plate

10 Sanding sheet

11 Depth stop

12 Segment saw blade

13 Vacuum hose*

14 Vacuum connection*

15 Fastening screw of the dust extraction*

16 Dust extraction*

17 Felt ring of the dust extraction*

*Accessories shown or described are not part of the standard de-

livery scope of the product. A complete overview of accessories

can be found in our accessories program.

Technical Data

Noise/Vibration Information

Measured sound values determined according to EN 60745.

Typically the A-weighted noise levels of the product are:

Sound pressure level 86 dB(A); Sound power level 97 dB(A).

Uncertainty K =3 dB.

Wear hearing protection!

Vibration total values a

(triax vector sum) and uncertainty K

determined according to EN 60745:

Sanding: a

=3.5m/s

, K=1.5 m/s

Cutting with plunge cut saw blade: a

=12.5m/s

K=1.5m/s

Cutting with segmential saw blade: a

=14m/s

, K=2.5 m/s

Scraping: a

=12m/s

, K=1.5 m/s

The vibration emission level given in this information sheet

has been measured in accordance with a standardised test

given in EN 60745 and may be used to compare one tool with

another. It may be used for a preliminary assessment of expo-

sure.

The declared vibration emission level represents the main ap-

plications of the tool. However if the tool is used for different

applications, with different accessories or poorly maintained,

the vibration emission may differ. This may significantly in-

crease the exposure level over the total working period.

An estimation of the level of exposure to vibration should also

take into account the times when the tool is switched off or

when it is running but not actually doing the job. This may sig-

nificantly reduce the exposure level over the total working pe-

riod.

Identify additional safety measures to protect the operator

from the effects of vibration such as: maintain the tool and the

accessories, keep hands warm, organise work patterns.

Declaration of Conformity

We declare under our sole responsibility that the product de-

scribed under “Technical Data” is in conformity with the fol-

lowing standards or standardization documents: EN 60745

according to the provisions of the directives 2011/65/EU,

2004/108/EC, 2006/42/EC.

Multi-function tool PMF 190 E

Article number

3 603 A00 5..

Preselection of orbital stroke

rate

Rated power input

W190

Output power

W89

No-load speed n

min

-1

15000–21000

Oscillation angle, left/right

°1.4

Weight according to

EPTA-Procedure 01/2003

kg 1.2

Protection class

/II

The values given are valid for a nominal voltage [U] of 230 V. For differ-

ent voltages and models for specific countries, these values can vary.

Please observe the article number on the type plate of your machine.

The trade names of the individual machines may vary.

OBJ_BUCH-345-008.book Page 13 Tuesday, February 21, 2012 1:35 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch PMF 190 E Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info