Bedienungsanleitung Bosch PMF 2000 CE Systeembox (Seite 17 von 123) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch)

766880

Zoom out

Zoom in

Vorherige Seite

1/123

Nächste Seite

English | 17

The stated vibration level and noise emission value repres-

ent the main applications of the power tool. However, if the

power tool is used for other applications, with different ap-

plication tools or is poorly maintained, the vibration level

and noise emission value may differ. This may significantly

increase the vibration and noise emissions over the total

working period.

To estimate vibration and noise emissions accurately, the

times when the tool is switched off or when it is running but

not actually being used should also be taken into account.

This may significantly reduce vibration and noise emissions

over the total working period.

Implement additional safety measures to protect the oper-

ator from the effects of vibration, such as servicing the

power tool and application tools, keeping their hands warm,

and organising workflows correctly.

Assembly

uPull the plug out of the socket before carrying out any

work on the power tool.

Changing the tool

uWear protective gloves when changing tools. There is

a risk of injury when touching the application tools.

Selecting an Application Tool

Please observe the application tools intended for your power

tool.

Application tool PMF 220 CE

PMF 2000 CE

The following table shows examples of application tools. You can find additional application tools in Bosch’s extensive range of

accessories.

Application tool Material Application

Bi-metal segment

saw blade Wood-based materials,

plastic, non-ferrous

metals

Separating cuts and plunge saw cuts;

including sawing close to edges, in corners and in difficult-

to-reach areas;

example: Shortening skirting boards that are already in-

stalled or door frames, plunge cuts when adapting floor

panels

Sanding plate for

Delta series 93mm

sanding sheets

Depends on the sanding

sheet Sanding surfaces at edges, in corners or in difficult-to-

reach areas;

depending on the sanding sheet, e.g. for sanding wood,

paint, varnish, stone;

fleeces for cleaning and for texturing wood, removing rust

from metal and for keying varnish, polishing felt for pre-

polishing

Profile sander Wood, pipes/profiles,

paint, varnish, filler, metal Convenient and efficient sanding of profiles up to a dia-

meter of 55mm;

red sanding sheets for sanding wood, pipes/profiles, var-

nish, filler and metal

Bi-metal plunge cut

saw blade for wood

and metal

Softwood, soft plastics,

plasterboard, thin-walled

aluminium profiles and

non-ferrous metal pro-

files, thin sheet metal,

non-hardened nails and

screws

Small separating cuts and plunge cuts;

example: Cutting a recess for sockets, cutting a copper

pipe so that it is flush with a surface, making plunge cuts in

plasterboard

Delicate adaptation work in wood;

example: Sawing recesses for locks and fittings

HCS plunge cut

saw blade for wood Wood-based materials,

soft plastics Separating cuts and plunge saw cuts;

including sawing close to edges, in corners and in difficult-

to-reach areas;

example: Thin plunge cut in solid wood for installing a

ventilation grille

Bosch Power Tools 1 609 92A 674 | (01.12.2020)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch PMF 2000 CE Systeembox Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info