Bedienungsanleitung Bosch PSR 1800 LI 2 SystemBox (Seite 14 von 191) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

765859

Zoom out

Zoom in

Vorherige Seite

1/191

Nächste Seite

14 | English

Noise/vibration information

Noise emission values determined according

toEN62841-2-1.

Typically, the A-weighted sound pressure level of the power

tool is71dB(A). Uncertainty K=3dB. The noise level when

working can exceed the volume stated. Wear hearing pro-

tection!

Vibration total values ah (triax vector sum) and uncertainty K

determined according to EN62841-2-1:

Drilling into metal: ah<2.5m/s2, K=1.5m/s2,

Screwdriving: ah<2.5m/s2, K=1.5m/s2

The vibration level and noise emission value given in these

instructions have been measured in accordance with a

standardised measuring procedure and may be used to com-

pare power tools. They may also be used for a preliminary

estimation of vibration and noise emissions.

The stated vibration level and noise emission value repres-

ent the main applications of the power tool. However, if the

power tool is used for other applications, with different ap-

plication tools or is poorly maintained, the vibration level

and noise emission value may differ. This may significantly

increase the vibration and noise emissions over the total

working period.

To estimate vibration and noise emissions accurately, the

times when the tool is switched off or when it is running but

not actually being used should also be taken into account.

This may significantly reduce vibration and noise emissions

over the total working period.

Implement additional safety measures to protect the oper-

ator from the effects of vibration, such as servicing the

power tool and application tools, keeping their hands warm,

and organising workflows correctly.

Assembly

uRemove the battery from the power tool before carry-

ing out work on the power tool (e.g. maintenance,

changing tool, etc.). The battery should also be re-

moved for transport and storage. There is risk of injury

from unintentionally pressing the on/off switch.

Charging the Battery

uUse only the chargers listed in the technical data. Only

these chargers are matched to the lithium-ion battery of

your power tool.

Note: The battery is supplied partially charged. To ensure

full battery capacity, fully charge the battery in the charger

before using your power tool for the first time.

The lithium-ion battery can be charged at any time without

reducing its service life. Interrupting the charging process

does not damage the battery.

The lithium-ion battery is protected against deep discharge

by the "Electronic Cell Protection (ECP)". When the battery

is discharged, the power tool is switched off by means of a

protective circuit: The application tool no longer rotates.

uDo not continue to press the On/Off switch after the

power tool has automatically switched off. The battery

can be damaged.

Follow the instructions on correct disposal.

Removing the battery (see figure A)

To remove the battery (8), press the release button (7) and

pull the battery back and out of the power tool. Do not use

force to do this.

Battery Charge Indicator

When the on/off switch (12) is pressed in halfway or com-

pletely, the battery charge-control indicator (10) indicates

the charge condition of the battery for several seconds. The

indicator consists of three green LEDs.

LED Capacity

Continuous light 3 x green ≥ 75 %

Continuous light 2 x green 50–75 %

Continuous light 1 x green 26–50 %

Slowly flashing light 1 x green ≤ 25 %

The three LEDs in the battery charge indicator flash

quickly when the temperature of the battery is outside

the operating temperature range of –30 to +65 °C and/or

the overload protection has been triggered.

Changing the tool (see figure B)

The drill spindle is locked when the on/off switch (12) is not

pressed. This makes it possible to change the application

tool in the drill chuck quickly, conveniently and easily.

Open the keyless chuck (2) by turning it in the direction of

rotation ➊ until the tool can be inserted. Insert the tool.

Firmly tighten the sleeve of the keyless chuck (2) by turning

it by hand in the direction of rotation ➋ until it audibly clicks

into place. This will automatically lock the drill chuck.

The lock will disengage again if you turn the sleeve in the op-

posite direction to remove the tool.

Dust/Chip Extraction

Dust from materials such as lead-containing coatings, some

wood types, minerals and metal can be harmful to one’s

health. Touching or breathing-in the dust can cause allergic

reactions and/or lead to respiratory infections of the user or

bystanders.

Certain dust, such as oak or beech dust, is considered carci-

nogenic, especially in connection with wood-treatment ad-

ditives (chromate, wood preservative). Materials containing

asbestos may only be worked by specialists.

– Provide for good ventilation of the working place.

– It is recommended to wear a P2 filter-class respirator.

Observe the relevant regulations in your country for the ma-

terials to be worked.

uAvoid dust accumulation at the workplace. Dust can

easily ignite.

1 609 92A 6DG | (07.06.2021) Bosch Power Tools

Bosch PSR 1800 LI 2 SystemBox Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info