Bedienungsanleitung Bosch PVQ811F15E (Seite 25 von 36) (Englisch)

745998

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

en Power manager

hPower manager

Po we r manager

You can use the power manager to set the total power

of the hob.

The hob is preset at the factory. Its maximum

performance is specified on the rating plate. You can

use the power manager to change the value in

accordance with the requirements for the relevant

electrical installation.

In order not to exceed this set value, the hob

automatically distributes the power available between

the cooking zones that are switched on.

As long as the power manager function is activated, the

output of a cooking zone may temporarily fall below the

nominal value. If a cooking zone is switched on and the

power limit is reached, ¬ appears in the heat setting

display for a short time. The appliance automatically

regulates and selects the highest possible power level.

For more information about how the total power of the

hob is changed, see section ~ "Basic settings"

DCleaning

Cl eani ng

:Warning – Risk of burns!

The appliance becomes hot during operation. Allow the

appliance to cool down before cleaning.

:Warning – Risk of burns!

The appliance becomes hot during operation. If hot

liquids penetrate the appliance, leave the appliance to

cool before removing the metal grease filter or the

overflow container.

:Warning – Risk of electric shock!

Do not use any high-pressure cleaners or steam

cleaners, which can result in an electric shock.

:Warning – Risk of electric shock!

Penetrating moisture may result in an electric shock.

Clean the appliance using a damp cloth only. Before

cleaning, pull out the mains plug or switch off the circuit

breaker in the fuse box.

:Warning – Risk of injury!

Components inside the appliance may have sharp

edges. Wear protective gloves.

Notes

■Only use a minimal amount of water when cleaning

so that no water enters the appliance.

■Before cleaning, remove any jewellery from your

arms and hands.

■Do not use any cleaning agents while the hob is still

hot. This may mark the surface. Ensure that any

residue left by cleaning agents is removed.

Cleaning agents

Only use cleaning products that are suitable for this

type of hob. Follow the manufacturer's instructions on

the product packaging.

Follow all instructions and warnings included with the

cleaning products.

Suitable maintenance and cleaning products can be

purchased from the after-sales service or in our e-Shop.

Caution!

Beware of causing surface damage

Do not use:

■Undiluted washing-up liquid

■Cleaning products designed for dishwashers

■Abrasive cleaning products

■Pressure washers or steam jet cleaners

■Oven cleaners

■Corrosive or aggressive cleaners, or those

containing chlorine

■Cleaners containing a large percentage of alcohol

■Hard, scratchy sponges, brushes or scouring pads

Cleaning en

Caution!

Beware of causing surface damage

Always wash new sponge cloths thoroughly before use.

To ensure that the different surfaces are not damaged

by using the wrong cleaning product, follow the

instructions in the table.

Components to clean

Hob surround (only on appliances with hob

surrounds)

To prevent damage to the hob surround, observe the

following instructions:

■Only use warm soapy water

■Wash new dish cloths thoroughly before use.

■Do not use harsh or abrasive cleaning agents.

■Do not use a glass scraper or sharp objects.

■Do not use any hard, scratchy sponges, brushes or

scouring pads.

Hob

Clean the hob each time you use it. This will prevent

food remnants from becoming burned on. Do not clean

the hob until the residual heat indicator has gone out.

Remove boiled-over liquids immediately and do not

allow any food remnants to dry on.

Leave the metal grease filter in the appliance while you

clean the hob. Dirt and food remnants collect in the

metal grease filter and not in the appliance interior. You

can clean the metal grease filter in the dishwasher.

Clean the hob with a damp dish cloth and dry it with a

cloth to prevent limescale build-up.

Stubborn dirt is best removed with a glass scraper or

glass ceramic cleaner (available from retailers). Follow

the manufacturer's instructions.

Area Cleaning products

Glass ceramic Glass cleaner for stains due to limescale and

water marks:

Clean the cooktop as soon as it has cooled

down. You can use a cleaning product that is

suitable for glass-ceramic hobs or glass

cleaner.

Glass scraper for stains caused by sugar, rice

starch or plastic:

Clean immediately. Caution: Risk of burns.

Then clean with a damp dish cloth and dry

with a cloth.

Note: Do not use cleaning products designed

for dishwashers.

Stainless steel Hot soapy water:

Clean with a dish cloth and dry with a soft

cloth.

Use a minimal amount of water when cleaning

to prevent water from penetrating the appli-

ance.

Leave dried-on remains to soak in a small

amount of soapy water; do not scour.

Clean stainless steel surfaces in the direction

of the finish only.

Special stainless steel cleaning products are

available from our after-sales service, through

our online shop or from specialist retailers.

Apply a very thin layer of the cleaning product

with a soft cloth.

Note: Do not use a glass scraper to clean the

cooktop surround.

Plastic Hot soapy water:

Clean with a soft cloth or in the dishwasher.

Controls Hot soapy water or an appropriate glass

cleaner:

Clean using a damp dish cloth and then dry

with a soft cloth.

No. Designation

1 Metal grease filter

2 Activated charcoal filter for air recirculation or acoustics fil-

ter for air extraction*

3 Hob

4 Control panel

5 Overflow container

*Depending on the appliance specifications







Bosch PVQ811F15E Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch PVQ811F15E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info