Bedienungsanleitung Bosch PVQ811F15E (Seite 27 von 36) (Englisch)

745998

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

en Cleaning

You can obtain a suitable glass scraper (article no.

00087670) from our after-sales service or through our

online shop.

Using a special sponge for cleaning glass-ceramic

hobs achieves great cleaning results.

Ventilation system

The filter must be regularly cleaned or replaced in order

to guarantee efficient filtration of odours and grease.

Metal grease filter

The metal grease filter must be cleaned regularly.

:Warning – Risk of fire!

Fatty deposits in the grease filter may catch fire.

Regularly clean the grease filter. Never operate the

appliance without a grease filter.

Activated charcoal filters

The activated charcoal filter should be replaced

regularly. The saturation indicator on your appliance will

tell you how frequently this needs to be done.

If you only use your appliance in air extraction mode,

change the acoustics filter as soon as it is dirty.

Saturation display

When the activated charcoal filters are saturated, an

audible signal sounds after the appliance is switched

off.

” lights up on the display.

Do not wait any longer to replace the activated charcoal

filters.

If you have replaced the activated charcoal filters, you

should reset the saturation indicator so that the ”

display goes out.

After the appliance has been switched off, ” lights up.

Press and hold the symbol for the ventilation system

until an audible signal sounds.

The activated charcoal filter saturation indicator has

now been reset.

Changing the activated charcoal filter (only in

circulating-air mode)

Activated charcoal filters trap the odour-causing

compounds in cooking smells. They are only used for

circulating-air mode.

Notes

■The activated charcoal filters and acoustics filters

are included with the appliance. When the activated

charcoal filters or acoustics filters need to be

replaced, they can be obtained from specialist

retailers, from our after-sales service or from our

online shop.

■The activated charcoal filters and acoustics filters

cannot be cleaned or reactivated.

■Only use genuine replacement filters. This will

ensure that the appliance performs optimally.

1. Remove the metal grease filter.

Notes

– Grease may accumulate in the bottom of the

container. Hold the metal grease filter level to

prevent grease from dripping out.

– Make sure that the metal grease filter does not

fall and damage the cooktop.

2. Remove the four activated charcoal filters or

acoustics filters and dispose of them properly.

3. Insert two of the activated charcoal filters or

acoustics filters into the left and right of the

appliance and slide them forwards.

4. Insert the other activated charcoal filters or acoustics

filters into the left and right of the appliance.

5. Insert the metal grease filter.











Cleaning en

Resetting the saturation displays

If you have replaced the activated charcoal filters, you

should reset the saturation indicator so that the ”

display goes out.

After the appliance has been switched off, ” lights up.

Press and hold the symbol for the ventilation system

until an audible signal sounds.

The activated charcoal filter saturation indicator has

now been reset.

Removing metal grease filter

The metal grease filters filter the grease out of kitchen

steam. To keep it in good working order, the metal

grease filter must be cleaned regularly.

Also clean the inside of the hob extractor system

regularly. You can use a special degreaser to remove

stubborn dirt.

1. Remove the metal grease filter.

Notes

– Grease may accumulate in the bottom of the

container. Hold the metal grease filter level to

prevent grease from dripping out.

– Make sure that the metal grease filter does not

fall and damage the cooktop.

2. Clean the metal grease filters in the dishwasher or

with hot soapy water.~ "Cleaning the metal grease

filter" on page 27

3. If required, after removing the metal grease filter,

remove the activated charcoal filter and clean the

appliance from the inside.

4. After cleaning, reinsert the dried metal grease filter.

Cleaning the metal grease filter

Notes

■Do not use aggressive, acidic or alkaline cleaning

products.

■The metal grease filter can be cleaned in the

dishwasher or by hand.

By hand:

Note: You can use a special degreaser to remove

stubborn dirt. It can be ordered via the online shop.

■Remove the metal grease filter.

■Soak the metal grease filter in hot soapy water.

■Clean the metal grease filter with a brush and then

rinse it thoroughly.

■Leave the metal grease filter to drain.

In the dishwasher:

■Do not clean the metal grease filter together with

cookware if heavily soiled.

■Place the metal grease filter in the dishwasher,

leaving plenty of space around it. Do not trap the

metal grease filter.

■For best results, place the metal grease filter in the

dishwasher filter side down.

Cleaning the overflow container

1. Unscrew the overflow container with both hands.

Note: Hold the overflow container level to prevent

liquid from leaking out.

2. Empty the overflow container and rinse it out.

3. If necessary, unscrew the screw and clean the

overflow container without the screw in the

dishwasher.

4. Clean the overflow container before screwing it back

into place.

Notes

■Ensure that the supply to the overflow container is

not blocked. Once it has cooled down, remove any

objects that have entered the appliance. To do this,

remove the metal grease filter.

■If liquid gets into the appliance from above, this is

collected in the overflow container. Unscrew the

overflow container and empty it.

1I 2

Bosch PVQ811F15E Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch PVQ811F15E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info