Bedienungsanleitung Bosch PWS 750-125 (Seite 27 von 167) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

78344

Zoom out

Zoom in

Vorherige Seite

1/167

Nächste Seite

English | 27

Bosch Power Tools 1 609 929 R16 | (28.9.09)

Flap Disc

f For operations with the flap disc, always

mount the hand guard 11.

Rubber Sanding Plate

f For operations with the rubber sanding

plate 12, always mount the hand guard 11.

See graphics page for the mounting sequence.

Screw on the round nut 14 and tighten with the

two-pin spanner.

Cup Brush/Disc Brush

f For operations with the cup brush/wheel

brush, always mount the hand guard 11.

See graphics page for the mounting sequence.

The cup brush/disc brush must be able to be

screwed onto the grinder spindle until it rests

firmly against the grinder spindle flange at the

end of the grinder spindle threads. Tighten the

cup brush/disc brush with an open-end spanner.

Approved Grinding Tools

All grinding tools mentioned in these operating

instructions can be used.

The permissible speed [min

-1

] or the circumfer-

ential speed [m/s] of the grinding tools used

must at least match the values given in the table.

Therefore, observe the permissible rotation-

al/circumferential speed on the label of the

grinding tool.

Dust/Chip Extraction

f Dusts from materials such as lead-containing

coatings, some wood types, minerals and

metal can be harmful to one’s health. Touch-

ing or breathing-in the dusts can cause aller-

gic reactions and/or lead to respiratory infec-

tions of the user or bystanders.

Certain dusts, such as oak or beech dust, are

considered as carcinogenic, especially in

connection with wood-treatment additives

(chromate, wood preservative). Materials

containing asbestos may only be worked by

specialists.

– Use dust extraction whenever possible.

– Provide for good ventilation of the work-

ing place.

– It is recommended to wear a P2 filter-

class respirator.

Observe the relevant regulations in your

country for the materials to be worked.

Operation

Starting Operation

f Observe correct mains voltage! The voltage

of the power source must agree with the

voltage specified on the nameplate of the

machine. Power tools marked with 230 V

can also be operated with 220 V.

When operating the machine with power from

mobile generators that do not have sufficient re-

serve capacity or are not equipped with suitable

voltage control with starting current amplifica-

tion, loss of performance or untypical behavior

can occur upon switching on.

Please observe the suitability of the power gen-

erator being used, particularly with regard to

the mains voltage and frequency.

Switching On and Off

To start the power tool, push the On/Off switch

3 forwards.

To lock the On/Off switch 3, press the On/Off

switch 3 down at the front until it latches.

max.

[mm]

D b d [min

-1

] [m/s]

115

125

22.2

11000

115

125

–

11000

75 30 M 14 11000 45

OBJ_BUCH-393-004.book Page 27 Monday, September 28, 2009 2:16 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch PWS 750-125 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch PWS 750-125

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info