5 Coffee strength button 5
This button 5 is used to select the coffee
strength:
5 mild
55 medium
555 strong
The selected setting is shown on the
display.
6 eco button
The appliance can be put into “eco” mode
or returned to normal mode with the eco
button.
In “eco” mode the appliance consumes less
energy.
All displays and buttons are dimmed,
only messages such as “Empty trays” are
displayed in the usual brightness.
The temperature of the cup shelf (warming
function) is lower.
Switching to “eco” mode starts an automatic
rinse cycle.
The appliance does not rinse if:
– no coffee was dispensed before it was
switched to “eco” mode.
– steam was dispensed shortly before it
was switched off.
i The appliance is programmed so that
it switches to “eco” mode automatically
after about 10 minutes. The default time
can be changed (see “Settings and
displays”).
7 Steam generation button h
Button h generates steam for foaming or
warming.
8 Steam dispensing dial
Hot water or steam can be dispensed by
turning the dial to g or h. To dispense
steam, the button h
(see “Preparing milk froth and hot milk”).
3 Display
The display uses symbols to indicate
appliance settings and messages.
6 Coffee dispensing, 2 cups
X
duct 15 is open
X on Ground coffee/Cleaning
5 on Mild coffee
55 on Medium-strength coffee
555 on Strong coffee
555
S on Service:
Descale/clean appliance
S
in operation
P on Fill water tank 13
P on Fill water tank 13, hold cup
+ J 9 and
turn dial 8 to g/h.
J 8 to g/h.
J on Turn dial 8 to
.
I on Empty trays
I
4 Coffee dispensing button 4
Coffee can be brewed by pressing this
button.
Press once for one cup. The coffee is
ground, brewed and dispensed into the cup.
Button 4
Press twice within 3 seconds for two
cups. The coffee is ground, brewed and
dispensed into the cups (the grinding
and brewing process takes place twice).
Button 46 (2 cups) appears
on the display during this process.
i If the coffee dispensing button 4 is
pressed again, the coffee brewing
process is terminated.
