Reset
The settings for water hardness, tempera-
ture and default time in “eco” mode can be
reset to the factory settings simultaneously.
Switch the appliance to “eco” mode and
remove trays 21 and 22.
Hold down the 4 and h buttons simulta-
neously for at least 5 seconds. The LEDs
Insert trays 21 and 22 again, the
appliance switches to “eco” mode.
Adjusting the grinding unit
Sliding switch 17 adjusts the degree of
Warning
Adjust the grinding unit only while it is
running! Otherwise the appliance may be
damaged.
Press the coffee dispensing button 4.
While the grinding unit is running, move
the sliding switch 17 to the desired
grind.
i The new setting will not become apparent
until the second or third cup is brewed.
Tip: For dark roast coffee beans, choose a
Float
23 in the water tray 22 shows
when the tray needs emptying.
23 is clearly visible, empty the
water tray 22.
Preparation
This fully automatic espresso/coffee
machine grinds beans freshly for each
brew. If possible, use only beans for fully
automatic coffee and espresso machines.
Deep-freeze or store in a cool place in
sealed, airtight containers. Coffee beans
can be ground while frozen.
Tip: Pre-warm cups, especially small, thick
espresso cups, by placing on the cup shelf
16 or rinsing with hot water.
Using coffee beans
The appliance must be ready for use.
Set the desired per-cup quantity using
dial 2.
Select the desired coffee strength using
button 5.
Place the prewarmed cup(s) under the
coffee outlet 10.
Press the coffee dispensing button 4
once for 1 cup or twice within three
seconds for 2 cups. The coffee is brewed
and dispensed into the cup(s).
Note
If you select two cups, the grinding and
brewing process is performed twice.
Coffee dispensing stops automatically
when the selected quantity has been
dispensed.
i The brewing process can be terminated
by pressing the coffee dispensing button
4 again. When coffee is brewed for
2 cups, it is dispensed via two outlet
nozzles (place the cups side by side).
