Bedienungsanleitung Bosch THB 1500 (Seite 11 von 56) (Deutsch, Englisch, Holländisch)

112553

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Use

The position of the programme selector

switch should not be changed during the

ironing process.

Changing the position of the programme

selector switch during the ironing process

does not alter the original programme

setting.

In order to fix the result of the ironing process,

the ironing dummy blows cold air for the last

minute of the ironing cycle.

When the ironing process comes to an end, a

sound signal is emitted and the light indicating

the “start / stop” function goes out.

Pausing the ironing process

The ironing process can be paused to stop the

ironing process, e.g. to correct the width of the

ironing dummy. To do this:

❏ Press “start/stop“ while the ironing cycle is

under way.

❏ The ironing process stops and the airing

motor turns itself off. The “start/stop”

indicator light flashes for 30 seconds. The

ironing programme can be started again at

any time during this period.

❏ Adjust as desired.If you press Start/Stop

again during this period, the appliance

continues the cycle from where it left off.

❏ If the 30-second time limit is exceeded, the

“start/stop” function light goes out: the

programme has finalised. It is necessary to

start a new ironing cycle.

If you change the position of the

programme selector switch while on

pause, the pause option is disabled and it

is necessary to reprogramme the

appliance. The previously-selected

programme is interrupted.

End of the ironing process

When the minute of cooling comes to an end,

a sound signal is emitted and the programme

finalises.

The ironing dummy slowly deflates.

❏ Set the collar adjuster knob to vertical.

❏ Open all the flaps on the button band

adjuster and on the collar support.

❏ Open all of the flaps on the button band

adjuster and the collar support.

❏ Release the cuff adjusters and pull them out

of the stretched shirtsleeves.

Leave the shirt to cool on a hanger to help

fix the results of the ironing process.

The next shirt can now be fitted onto the

appliance ready for the ironing process to

begin again.

Ironing/Airing

Warning!

Foreign objects (e.g. pens, clips) may

damage the garment and/or the ironing

dummy.

Do not air knitwear or elasticated

garments! They may loose shape.

Only air non-elasticated, cloth garments.

There are two ironing/airing programmes to

choose from: cold and hot, see Airing in

“Preparing your garments”.

❏ Empty all the pockets on the garment to be

aired.

❏ Fit the garment onto the appliance and

secure it as described in the “ironing”

section. See “Use”.

❏ If the garment is a jacket, then it is not

necessary to secure the cuffs. Remove the

cuff adjusters if necessary.

❏ Selected the desired airing programme with

the programme selector switch. See “Use”.

❏ Press “start/stop“. The start/stop light lights

up. The ironing dummy inflates and the

airing process begins.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch THB 1500 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info