Bedienungsanleitung Bosch Tronic 3500 TO (Seite 10 von 52) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

780665

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Installation instructions

Tronic 2500 TO | Tronic 3500 TO | Tronic Store Advanced – 6 720 876 005 (2021/07)

•The small water heater is only suitable for use

with an open (unpressurised) and a single tap

connection. The warm water outlet is used for

pressure compensation and may only be

connected to suitable ﬁttings (Order

No. BZ 13051, BZ 13071 or BZ 13062 for

undersink appliances or BZ 11113 for oversink

appliances).

• The tap outlet must always remain free. Do not use

perlators (diffusers) or shower taps.

• This appliance can be used by children aged

8 years and older as well as by persons with

diminished bodily, sensory or mental perception, or

those who lack knowledge or experience, if they are

monitored or have received instruction concerning

use and comprehend the possible dangers that can

result. Children may not play with the appliance.

Cleaning and maintenance by the user may not be

performed by unsupervised children.

• Keep children away from the appliance.

• Please monitor children to ensure that they do not

play with the appliance.

• The warm water pipe may be hot. Please inform and

instruct children appropriately.

• Do not use aggressive or abrasive cleaning

detergents!

• Do not use a steam cleaner.

Please read this installation and operating

instruction manual carefully, then act accordingly!

Store for future reference.

2 Installation instructions

2.1 Unpacking

• Inspect the new appliance for transport damage!

• Please dispose of the packaging, and if applicable, the old appliance

in an environmentally-friendly manner.

Scope of delivery (Fig. 1)

1Appliance with operating panel

2Installation bracket

3 TR3500TOR 5 T only:

Mounting (2 screws, 2 wall plugs)

4Documentation

2.2 Product description

The small water heater is only suitable for open (unpressurised)

installation. It heats and stores drinking water up to approx. 85 °C.

Different temperature levels can be selected with the temperature

selector knob.

The appliance may not be operated with pre-heated water, as otherwise

the safety temperature limitation will trip.

The appliance is connected using the mains plug.

This installation and operating instruction manual describes various

appliance types:

• Undersink appliances with additional drip stop function and

pressure stop TR3500TO 5 T and TR3500TOR 5 T

• Oversink appliances TR2500TO 5 B

Preparations for installation (Fig. 1)

•Shut off the water supply before connecting the appliance.

Do not insert the mains plug.

• Remove the installation bracket on the appliance and break off the

retaining rings (A).

• Fix the connection cable to the rear of the appliance to suit the

required length (B).

2.3 Wall mounting

Undersink appliances TR3500TOR 5 T and TR3500TO 5 T

(Fig. 2)

• Align the appliance on the wall and use the three indents (top, left and

right on the appliance) to apply markings (A).

• Connect the markings by a pattern of crossed lines with a spirit level

(B1 and B2).

• Place the installation bracket on top at the point of intersection of the

drawn lines and mark the position for the holes (C).

• Drill the holes and insert wall plugs (D1).

• Attach the installation bracket (notch at top) to the wall using the

screws (D2).

• Suspend the appliance in the installation bracket (D3).

Exchanging appliances (Fig. 3)

• When replacing an old small water heater with this new appliance, the

existing drill holes with wall plugs can be used. Please note that the

new appliance is approx. 2 cm higher.

If the new appliance is to be ﬂush at the top like the old appliance (E1):

• Attach the new installation bracket to the wall with the notches at

the top.

If the new appliance is to be ﬂush at the bottom like the old

appliance (E2):

• Turn the installation bracket around and attach to the wall with

the notches at the bottom.

Oversink appliances TR2500TO 5 B (Fig. 4)

• Align the appliance on the wall and use the three indents (top, left and

right on the appliance) to apply markings (F).

• Connect the markings to a pattern of crossed lines with a spirit level

(G1 and G2).

• Place the installation bracket on top at the point of intersection of the

drawn lines and mark the position for the holes (H).

• Drill the holes and insert wall plugs (I1).

• Attach the installation bracket (notch at top) to the wall using the

screws (I2).

Exchanging appliances (Fig. 5)

When replacing an old small water heater with this new appliance, the ex-

isting drill holes with wall plugs can be used. Please note that the new ap-

pliance is approx. 2 cm higher.

• Turn the installation bracket around and attach to the wall with the

notches at the bottom (J).

2.4 Water connection

CAUTION:

Caution!

The existing ﬁtting may not be covered with scaling.

•Do not grease the thread!

Info: Replacement for damaged threaded nozzles available from

customer service.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch Tronic 3500 TO Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info