697439

Bosch Uni 3000 F Seite 3

3
Zoom out
Zoom in
Vorherige Seite
1/12
Nächste Seite
Key to symbols and safety instructions | 3
6 720 812 901 (2014/10)Uni 3000 F
1.2 Safety instructions
General safety instructions
Failure to observe the safety instructions can result in serious personal
and possibly life-threatening injuries as well as physical damage and
damage to the environment.
▶ Read the safety instructions carefully prior to commissioning the
system.
Danger through failure to consider your own safety in an emergency
such as a fire
▶ Never put yourself at risk of fatal injury. Your own safety is paramount.
Installation, conversion and operation
Insufficient ventilation can lead to dangerous flue gas leaks.
▶ Installation and commissioning as well as servicing and maintenance
must be carried out only by a suitably qualified contractor.
▶ Ensure that the plant room remains free from the risk of frost.
▶ The heating system must be installed and operated in accordance
with the applicable engineering practices as well as national, regional
and local regulations.
▶ Have the appliance installed only by a suitably qualified engineer.
▶Never modify any parts in contact with flue gas.
▶ Do not operate the device without sufficient water volume.
▶ Always keep equipment openings (doors, maintenance cover) closed
during operation.
▶ Only use approved fuels according to the rating plate.
▶ Ensure that the required ventilation cannot be blocked or hindered in
any way.
Risk through oil leaks
▶ If using oil as fuel, country-specific regulations hold the operator
responsible for asking a contractor to correct any oil leaks the
moment they are discovered.
If you smell fuel:
▶ Close the fuel isolation valve.
▶ Open windows.
▶ Never operate electrical switches.
▶ Extinguish all naked flames.
▶ Never smoke.
▶ Warn all occupants in the building, but do not ring doorbells.
▶ Leave the building and telephone your gas supply utility and
authorised contractor from an outside phone.
If you suspect the smell of flue gas:
▶ Switch off the appliance ( page 6).
▶ Isolate the fuel supply and guard against unintentional re-connection.
▶ Open windows and doors.
▶ Notify an authorised contractor.
Electric shock hazard
▶ Before carrying out any work on the heating system, disconnect the
heating system from the power supply across all poles. For example,
press the emergency stop switch outside the boiler room.
▶ It is not enough to switch off at the control unit.
▶ Secure the heating system against unintentional reconnection.
▶ Adhere to country-specific rules and regulations when making the
electrical connection, commissioning, servicing and carrying out
maintenance.
Installation and conversion
▶ Only have the appliance installed or modified by an authorised and
suitably qualified contractor.
▶ Never modify any parts in contact with flue gas.
▶With open flue appliances: Never cover or reduce the size of air vents
in doors, windows or walls. If draught-proof windows are fitted,
ensure there is an adequate combustion air supply.
▶ Ensure that the plant room remains free from the risk of frost.
▶ The heating system must be installed and operated in accordance
with the applicable engineering practices as well as national, regional
and local regulations.
Inspection and maintenance
▶ Recommendation for customers: Arrange a maintenance and
inspection contract with an authorised contractor, covering an annual
inspection and demand-dependent maintenance.
▶ The user is responsible for the general and environmental safety of the
heating system (in compliance with national regulations).
▶ Only use genuine spare parts! Spare parts are available via spare parts
merchants and a list of genuine parts can be found online (see last
page for details).
Explosive and highly flammable material
▶ Never use or store highly flammable materials (paper, thinners,
paints etc.) near the boiler.
Combustion/room air
▶ Keep the combustion/ambient air free of corrosive substances
(e.g. halogenated hydrocarbons that contain chlorine or fluorine
compounds). This will help to prevent corrosion.
▶ Keep combustion air free of dust.
▶ Never hang up washing to dry in the plant room.
Thermal disinfection
▶ Risk of scalding!
Monitor any operation with temperatures in excess of 60 °C.
Disposal
▶ Dispose of packaging in an environmentally responsible manner.
3 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Bosch Uni 3000 F wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Bosch Uni 3000 F

Bosch Uni 3000 F Installationsanweisung - Englisch - 40 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info