Bedienungsanleitung Bosch Uni Condens 8000 F (Seite 6 von 48) (Englisch)

697430

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Product Information

Uni Condens 8000 F – 6720867056 (2016/10)

2.6 Data plate

If you contact the manufacturer with any questions about this product,

always provide the details on the data plate. If we have these details, we

can quickly answer your specific query.

The details on the data plate are binding and must be observed!

You will find information such as the serial number, output and approval

details on the data plate.

The serial number can be found in the upper section of the data plate and

is labelled with the number 2.

The data plate is fitted to the back of the boiler casing.

The data plate contains abbreviations, pictograms and language-

dependent texts.

Table 2 Abbreviations used on the data plate

Table 3 Pictograms used on the data plate

Table 4 Example of pictograms used on the data plate

All language-dependent texts are labelled with numbers. The

translations can be found on an additional data plate.

▶ Attach additional data plate next to the data plate

( chapter 6.11, page 23).

Remarks in relation to the approval data stated:

• Standards are stated to indicate which standards are satisfied as a

minimum requirement (e.g. EN 303-1).

• CE-0085CM0479 is the so-called product ID number of the DVGW

approval in accordance with European guidelines.

• 2009/142/EC stands for the European Gas Appliances Directive

which the floor standing condensing boiler complies with. Further

details  EC Declaration of Conformity.

• Gas appliances are classified in the European guideline CEN/TR

1749 according to the type of flue gas routing. "B23" means that the

wall mounted gas boiler is intended for connection to a flue system

that routes flue gas to outside the installation location, takes

combustion air from the installation location directly and is equipped

with an air blower located in front of the boiler (e.g. at the burner).

2.7 Product Description

The Uni Condens 8000 F 800...1200 is a floor standing condensing

boiler with a slim, compact design and a small footprint, comprising a

combustion chamber located at the top and a condensation heating

surface located at the bottom.

With the Uni Condens 8000 F 800...1200 floor standing condensing

boilers, all parts that come into contact with products of combustion or

condensate are made from high grade stainless steel. This makes

operation possible without limitations on the flow and return

temperature, the flow rate or the burner low load.

The Uni Condens 8000 F 800...1200 is also referred to in this manual as

UC8000F 800...1200, boiler or heat source.

The boiler has two separate thermohydraulic return connections for the

high and low temperature heating circuits ( fig. 1, page 7).

The Uni Condens 8000 F 800...1200 must be equipped with a burner

that is suitable for the boiler.

The main components of the boiler are ( fig. 1, page 7):

• Boiler shell [1] in conjunction with a burner The boiler block transfers

the heat produced by the burner to the heating water.

• Thermally insulating casing The boiler shell and thermal insulation

reduce energy losses.

• Control unit (accessory) [8]The control unit monitors and controls all

electrical boiler components.

Abbreviation Meaning

Qn (Hi) Maximum rated heat input/rated heat load of the boiler

Pn 50/30 °C Rated output of the boiler at an operating temperature

of 50/30 °C

Pn 80/60 °C Rated output of the boiler at an operating temperature

of 80/60 °C

PMS Permitted operating pressure

P(Test) Test pressure of boiler

Tmax Permissible flow temperature

V Water content of boiler

Cat. Gas group classification according to EN 437 Tables

B.1 and B.2. The gas group classification according to

EN 437 specifies which gas qualities the devices were

found to be suitable for during type testing.

P(mbar) Gas supply pressure for the gas group classification

specified in EN 437. EN 437 differentiates between

wall mounted gas boilers based on gas type,

corresponding gas family and the permissible gas

supply pressure during operation, which depends on

the country.

Pictogram Meaning

based on natural gas as fuel

based on fuel oil as fuel

Burner symbol

Pictogram Meaning

Necessary approval for mounted burner

based on the use of natural gas as fuel:

EN 676

Necessary approval for mounted burner

based on the use of fuel oil as fuel: EN 267

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch Uni Condens 8000 F Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch Uni Condens 8000 F

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info