Bedienungsanleitung Bosch UniversalChain 35 (Seite 15 von 343) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

708255

Zoom out

Zoom in

Vorherige Seite

1/343

Nächste Seite

English | 15

u Hold the power tool by insulated gripping surfaces

only, because the saw chain may contact hidden wir-

ing or its own cord. Saw chains contacting a “live” wire

may make exposed metal parts of the power tool “live”

and could give the operator an electric shock.

u Wear safety glasses and hearing protection. Further

protective equipment for head, hands, legs and feet is

recommended. Adequate protective clothing will reduce

personal injury by flying debris or accidental contact with

the saw chain.

u Do not operate a chain saw in a tree. Operation of a

chain saw while up in a tree may result in personal injury.

u Always keep proper footing and operate the chain saw

only when standing on fixed, secure and level surface.

Slippery or unstable surfaces such as ladders may cause a

loss of balance or control of the chain saw.

u When cutting a limb that is under tension be alert for

spring back. When the tension in the wood fibres is re-

leased the spring loaded limb may strike the operator

and/or throw the chain saw out of control.

u Use extreme caution when cutting brush and saplings.

The slender material may catch the saw chain and be

whipped toward you or pull you off balance.

u Carry the chain saw by the front handle with the chain

saw switched off and away from your body. When

transporting or storing the chain saw, always fit the

guide bar cover. Proper handling of the chain saw will re-

duce the likelihood of accidental contact with the moving

saw chain.

u Follow instructions for lubricating, chain tensioning

and changing accessories. Improperly tensioned or lub-

ricated chain may either break or increase the chance for

kickback.

u Keep handles dry, clean, and free from oil and grease.

Greasy, oily handles are slippery causing loss of control.

u Cut wood only. Do not use chain saw for purposes not

intended. For example: For example: do not use chain

saw for cutting plastic, masonry or non-wood building

materials. Use of the chain saw for operations different

than intended could result in a hazardous situation.

u Causes and operator prevention of kickback:

– Kickback may occur when the nose or tip of the guide

bar touches an object, or when the wood closes in and

pinches the saw chain in the cut.

– Tip contact in some cases may cause a sudden reverse

reaction, kicking the guide bar up and back towards the

operator.

– Pinching the saw chain along the top of the guide bar

may push the guide bar rapidly back towards the oper-

ator.

– Either of these reactions may cause you to lose control

of the saw which could result in serious personal injury.

Do not rely exclusively upon the safety devices built into

your saw. As a chain saw user, you should take several

steps to keep your cutting jobs free from accident or in-

jury.

Kickback is the result of tool misuse and/or incorrect op-

erating procedures or conditions and can be avoided by

taking proper precautions as given below:

u Maintain a firm grip, with thumbs and fingers encirc-

ling the chain saw handles, with both hands on the

saw and position your body and arm to allow you to

resist kickback forces. Kickback forces can be con-

trolled by the operator, if proper precautions are taken.

Do not let go of the chain saw.

u Do not overreach and do not cut above shoulder

height. This helps prevent unintended tip contact and en-

ables better control of the chain saw in unexpected situ-

ations.

u Only use replacement bars and chains specified by the

manufacturer. Incorrect replacement bars and chains

may cause chain breakage and/or kickback.

u Follow the manufacturer’s sharpening and mainten-

ance instructions for the saw chain. Decreasing the

depth gauge height can lead to increased kickback.

Additional safety warnings

u It is recommended that the first time user should have

practical instruction in the use of the chainsaw and the

protective equipment from an experienced operator. The

initial practice should be cutting logs on a saw horse or

cradle.

u This appliance is not intended for use by persons (includ-

ing children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction concern-

ing use of the appliance by a person responsible for their

safety.

Children should be supervised to ensure that they do not

play with the appliance.

u Children and juveniles, with the exception of appren-

tices older than 16 years and under supervision, may

not operate the chain saw. The same applies for per-

sons who do not or do not sufficiently know how to

handle the chain saw. The operating instructions should

always be ready to hand. Persons unfit or tired must not

operate the chain saw.

u When working with the machine, always hold it firmly

with both hands and provide for a secure stance. The

power tool is guided more secure with both hands.

u Always ensure all handles and guards are fitted when

using the machine. Never attempt to use an incomplete

machine or one fitted with an unauthorized modification.

u Always wait until the machine has come to a complete

stop before placing it down. The tool insert can jam and

lead to loss of control over the power tool.

Bosch Power Tools F 016 L81 829 | (28.11.2019)

Bosch UniversalChain 35 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info