Bedienungsanleitung Bosch UniversalHedgeCut 60 (Seite 11 von 191) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

707742

Zoom out

Zoom in

Vorherige Seite

1/191

Nächste Seite

English | 11

Use only extension cords, cables, leads, cable reels that

comply with EN 61242/IEC 61242 or IEC 60884-2-7.

If you want to use an extension cable when operating your

product, only the following cable dimensions should be

used:

– Nominal conductor area of 1.25mm

or 1.5mm

– Maximum length 30m for a Cord Extension Set or max-

imum length of 60m for a Cable Reel with Residual Cur-

rent Device (RCD).

Note: If an extension cable is used it must be earthed and

connected through the plug to the earth cable of your supply

network in accordance with prescribed safety regulations.

WARNING! Inadequate extension cables can

be dangerous. Extension cable, plug and

socket must be of watertight construction

and intended for outdoor use.

Products sold in GB only:

Your product is fitted with an BS 1363/A approved electric

plug with internal fuse (ASTA approved to BS 1362).

If the plug is not suitable for your socket outlets, it should be

cut off and an appropriate plug fitted in its place by an au-

thorised customer service agent. The replacement plug

should have the same fuse rating as the original plug.

The severed plug must be disposed of to avoid a possible

shock hazard and should never be inserted into a mains

socket elsewhere.

u Products that are only sold in AUS and NZ: Use a resid-

ual current device (RCD) with a nominal residual current

of 30 mA or less.

Symbols

The following symbols are important for reading and under-

standing the original instructions. Please take note of the

symbols and their meaning. The correct interpretation of the

symbols will help you to use the product in a better and safer

manner.

Symbol Meaning

Wear protective gloves

Symbol Meaning

Wear safety glasses/goggles

Movement direction

Reaction direction

Weight

Switching On

Switching Off

CLICK!

Audible noise

Prohibited action

Accessories/Spare Parts

Intended Use

The machine is intended for cutting and trimming hedges

and bushes in domestic use.

Product features (see figures A and

The numbering of the product features refers to the illustra-

tion of the product on the graphics pages.

(1)

Handle (insulated gripping surface)

(2)

On/Off switch

(3)

Lock-off button for On/Off switch

(4)

Hand guard

(5)

Blade

(6)

Protection sleeve

(7)

Mains plug

(8)

Extension cable

country specific

Technical Data

Hedgecutter

UniversalHedgeCut

AdvancedHedgeCut

Article number

3 600 HC0 500 3 600 HC0 700 3 600 HC0 800 3 600 HC0 900

Rated power input W 480 480 500 500

No-load stroke speed min

-1

3400 3400 3400 3400

Cutting length mm 500 600 650 700

Tooth opening mm 26 30 34 34

Bosch Power Tools F 016 L81 787 | (16.08.2019)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch UniversalHedgeCut 60 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info