Bedienungsanleitung Bosch UniversalHedgeCut 60 (Seite 12 von 191) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

707742

Zoom out

Zoom in

Vorherige Seite

1/191

Nächste Seite

12 | English

Hedgecutter

UniversalHedgeCut

AdvancedHedgeCut

Weight according to

EPTA‑Procedure

01:2014

kg 3.5 3.7 4.0 4.1

Protection class

/ II / II / II / II

Serial number see type plate on garden tool

The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.

Noise/Vibration Information

3 600 HC0 500 3 600 HC0 700 3 600 HC0 800 3 600 HC0 900

Noise emission values determined according to EN60745-2-15.

Typically the A-weighted noise levels of the product are:

– Sound pressure level dB(A)

69 69 71 71

– Sound power level dB(A)

90 90 92 92

– Uncertainty K dB

1.0 1.0 1.0 1.0

Vibration total values ah (triax vector sum) and uncertainty K determined according to EN60745-2-15

– Vibration emission value a

m/s

2.5 2.5 2.5 2.5

– Uncertainty K m/s

1.5 1.5 1.5 1.5

The vibration level given in these instructions has been

measured in accordance with a standardised measuring pro-

cedure and may be used to compare power tools. It can also

be used for a preliminary estimation of exposure to vibra-

tion.

The stated vibration level applies to the main applications of

the power tool. However, if the power tool is used for differ-

ent applications, with different application tools or poorly

maintained, the vibration level may differ. This can signific-

antly increase the exposure to vibration over the total work-

ing period.

To estimate the exposure to vibration accurately, the times

when the tool is switched off or when it is running but not ac-

tually being used should also be taken into account. This can

significantly reduce the exposure to vibration over the total

working period.

Implement additional safety measures to protect the oper-

ator from the effects of vibration, such as servicing the

power tool and application tools, keeping the hands warm,

and organising workflows correctly.

Operation

u Pay attention to the mains voltage. The voltage of the

power source must match the voltage specified on the

rating plate of the machine.

Switching ON/OFF (see figures C and D)

To switch ON, firstly press and hold the lock-off button for

On/Off switch (3). Then press the On/Off switch (2) and

keep it pressed.

To switch OFF, release the lock-off button for On/Off switch

(3) and then release the On/Off switch (2).

Sawing Function

Although the tooth opening allows wood to be cut up to

Ø20mm, the tip of the blade is designed to cut wood up to

Ø25mm.

Working with the Hedgecutter (see figure E)

Move the hedgecutter evenly forward along the cutting line.

The double edge cutting blade enables cutting in either dir-

ection, or with a side to side motion.

Cut the sides of the hedge first, then the top.

To cut the sides straightly, we recommend cutting from bot-

tom to top in the direction of growth. Younger stems tend to

move outwards when cutting them from top to bottom, res-

ulting in shallow patches or holes in the hedge.

To reach a level finish, fasten a piece of string along the

length of the hedge at the required height and use as an

alignment guide. Cut the hedge just above the string.

Pay attention that no objects such as wires are cut. The

blade or drive can be damaged.

F 016 L81 787 | (16.08.2019) Bosch Power Tools

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch UniversalHedgeCut 60 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info