Bedienungsanleitung Bostitch BF33 (Seite 14 von 300) (Alle Sprachen)

721876

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

Inserting and Removing the

Battery Pack from the Tool (ﬁ g. 2)

WARNING: To reduce the risk of

serious personal injury, lock tool

off and disconnect battery pack

before making any adjustments or

removing/installing attachments or

accessories. An accidental start-up can

cause injury.

NOTE: Make sure your battery pack (l) is fully

charged. The battery packs supplied will not

necessarily be fully charged.

TO INSTALL THE BATTERY PACK INTO THE TOOL

HANDLE

1. Align the notch inside the tool’s handle with

the battery pack (l).

2. Slide the battery pack firmly into the handle

until you hear the lock snap into place.

TO REMOVE THE BATTERY PACK FROM THE TOOL

1. Press the release button (n) and slide the

battery pack out of the tool handle.

2. Insert battery pack into the charger as

described in the charger section of this

manual.

FUEL GAUGE BATTERY PACKS (FIG. 2, 2A)

Some Bostitch battery packs include a fuel gauge

which consists of three green LED lights that

indicate the level of charge remaining in the battery

pack.

To actuate the fuel gauge, press and hold the

fuel gauge button (o). A combination of the three

green LED lights will illuminate designating the

level of charge left. When the level of charge in the

battery is below the usable limit, the fuel gauge

will not illuminate and the battery will need to be

recharged.

NOTE: The fuel gauge is only an indication of the

charge left on the battery pack. It does not indicate

tool functionality and is subject to variation based

on product components, temperature and end-

user application.

NOTICE: Do not store tool with battery

pack installed. To prevent damage to

the pack and to ensure best battery

life, store battery packs out of the tool

or charger in a cool, dry location.

Rotating Rafter/Belt Hook (ﬁ g. 6)

The rafter/belt hook (j) and can be easily positioned

to the left or right of the tool to accommodate left-

or right-handed users.

If use of the hook is not desired at all, it can be

rotated to the front or back of the handle base.

Loading the Tool (ﬁ g. 4)

WARNING: Always lock tool off and

disconnect battery pack before loading

and unloading fasteners.

1. Slide the spring-loaded pusher latch (h) to the

base of the magazine to lock it into place.

2. Select an appropriate collated nail stick. (Refer

to Technical Data.) Bostitch would always

recommend that you use Bostitch branded

first fix nails.

WARNING: Since accessories, other

than those offered by Bostitch, have

not been tested with this product,

use of such accessories with this tool

could be hazardous. To reduce the risk

of injury, only Bostitch recommended

accessories should be used with this

product.

3. Insert collated nail stick into the loading slot on

side of the magazine. Be sure the fasteners

ride on their tips in the nail channel.

4. Close the magazine by releasing the pusher

latch. Carefully allow the latch to slide forward

and engage the nail strip.

Dry Fire Lock out

The nailer is equipped with a dry fire lock out

which restricts the tool from actuating when the

magazine is nearly empty. When approximately 7

to 9 nails remain in the magazine, the tool dry fire

lock actuates. Refer to Loading the Tool to reload

a stick of collated nails.

NOTE: If heavy force is placed on the tool it is

possible to override the lock out. This protects the

tool from potential damage if dropped.

Adjusting the Driving Depth (ﬁ g. 5)

The nail driving depth can be adjusted using the

depth adjustment wheel.

1. To drive the nail shallower, rotate the depth

adjustment wheel (d) to the left, toward the

shallow nail icon.

2. To sink a nail deeper, rotate the depth

adjustment wheel (d) to the right, toward the

deeper nail icon.

Selecting the Mode (ﬁ g. 1)

BF33 ONLY

To select sequential action mode, slide the mode

selector switch (i) to display the single nail

icon ( ).

To select bump action mode, slide the mode

selector switch (i) to display the three nail

icon ( ).

document do not constitute CE compliance for the products.

de ce document ne signifient en rien que les produits soient conformes aux normes CE.

Kopien dieses Dokuments erfüllen nicht die CE-Richtlinien für Produkte.

kopieën van dit document willen niet zeggen dat de producten voldoen aan de CE-vereisten.

udgør ikke CE overholdelse for produkterne.

kopiot eivät muodosta tuotteille CE-yhdenmukaisuutta.

εξουσιοδοτημένα αντίγραφα του παρόντος εγγράφου δεν αποτελούν συμμόρφωση CE για

τα προϊόντα.

documento non garantiscono la conformità CE per i relativi prodotti.

dokumentet oppfyller ikke kravene for CE-merking for produktet.

deste documento não estão em conformidade com a CE para os produtos.

documento no suponen la conformidad con las normas CE de los productos.

Nieautoryzowane kopie niniejszego dokumentu nie stanowią deklaracji zgodności CE

prezentowanych produktów.

Nieautoryzowane kopie niniejszego dokumentu nie stanowią deklaracji zgodności CE

prezentowanych produktów.

dokumentu nie sú v súlade s CE pre dané výrobky.

HU ©Stanley Bostitch. A dokumentum engedély nélkül nem sokszorosítható. Az engedély nélkül

sokszorosított dokumentum nem jelenti a termék CE-megfelelőségét.

Bostitch BF33 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info