741648
14
Zoom out
Zoom in
Vorherige Seite
1/88
Nächste Seite
14
Resetting To Factory Default
Should you want to return your Solo XT to its out of the box con guration, you can use the Factory Default
reset feature. This erases the DAB station list, clears the radio station presets, and returns all other menu
settings to there original state.
Warning: Do not use this feature unless you want to return the Solo XT to its original state. Before using this
feature you might want to make notes about how your radio is con gured.
1
Turn the MODE/INFO control to highlight “Setup Options’. Press the control.
2
Turn the MODE/INFO control to highlight “Factory Default. (The “Factory
Default menu selection is not on the initial “Setup Options” menu. Turn
the MODE/INFO control until it appears. See the display illustrations on
page 6.) You’ll see the display shown to the right.
3
Press the control to return your Solo XT to the factory default state.
Connecting Other Equipment
Connecting Headphones
Connect the headphone plug to the
1
/8-inch jack on the front panel. This turns o the Solo XT internal
speaker. If your headphones have the old-style large
1
/4-inch plug you will need an adapter.
Using Aux Inputs
Other audio equipment, such as an iPod or a portable CD player, can be connected to the Solo XT through
the rear panel Aux input. You will need a cable with a stereo mini plug on both ends. Select the Aux input
using the MODE/INFO control as described in the “Selecting Sources or Setup Options Functions” section of
this manual.
Line Output
You can connect the Solo XT to another component using the
1
/8 -inch Line Output jack.
Security Cable Connection
There is a security cable connection point on the rear of the Solo XT, in the corner above the antenna
connector. This is the same as the connection point found on most laptop computers. Connect a computer
security cable between the Solo XT and a solid anchor point to help prevent theft of your Solo XT.
About Clock Memory
When power to the Solo XT is interrupted a special power component called a “super-cap will keep the clock
functions active for a period of 24-48 hours. If the Solo XT is without power for a longer period of time you
may need to reset the clock when power is restored.
14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Boston Acoustics Horizon Solo XT wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info