Bedienungsanleitung Bowers Wilkins PX (Seite 4 von 104) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch)

704657

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

ENGLISH

3. Battery Charging

PX headphones are shipped with battery power

and may be used immediately, however, it is good

practice to charge the battery fully before rst use. It

can take up to 3 hours for PX headphones to reach

full charge. However it is possible to use them while

the battery is charging.

Note: The indicator initially displays battery

charge when PX headphones are switched on.

Green indicates that the battery is above 50%

charged. Yellow indicates that the battery is

between 50% and 30% charged. Red indicates

that the battery is below 30% charged. If the

indicator blinks red, the battery charge is

insufcient for headphones operation. Indicator

illumination is fully described in Diagram 7.

Battery charging is described in the

following paragraphs:

• Using the supplied USB charging cable, connect

the headphones to a powered USB socket: a

computer USB socket, a mains USB charger or

an in-car charger.

• While charging, the headphone indicator will

blink green. As the level of charge increases

the illuminated period of the blink will get

longer. When fully charged the indicator will

remain illuminated.

4. Wearing Your Headphones

Using your headphones correctly will help ensure

that their performance reaches its full potential. First,

identify the left and right ear pieces. Identication

legends can be found on the lower inside of the

headband as illustrated in Diagram 3.

Place the headphones on your head with the

headband adjusted so that each ear piece sits

comfortably over the ear as illustrated in Diagram 4.

Ensure that the ear pieces are not pulling upwards

and causing unnecessary pressure on your head.

We recommended that you return your headphones

to their storage pouch when not in use.

Note: Wearing glasses that distort the prole

of your ears may interfere with headphone

Environment Filter performance. Similarly, hair

trapped between your ears and the headphone

ear-pieces may compromise proximity sensing.

5. Switching On and Off

To switch on your PX headphones, slide the power

button sideways as shown in Diagram 5.

Your PX headphones are designed to switch

intelligently to standby and disconnect from

Bluetooth when not in use, and to wake up when

worn, so there is generally no need to switch them

off. Should you want to switch off however, slide the

power button and hold it for a second or two. The

indicator will ash red to conrm switch off.

The headphones will provide an audio cue as they

switch on and off.

Note: PX headphones left switched on

but inactive for more than two minutes will

automatically switch to standby mode to save

battery power.

Note: The sensitivity of the ear-piece proximity

sensors that control switch on and standby can

be adjusted within the headphone app.

Diagram 3

Identifying left and right

Diagram 4

Adjusting the ear-piece

Diagram 5

Switching on

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bowers Wilkins PX Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info