Bedienungsanleitung Bowers Wilkins PX (Seite 6 von 104) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch)

704657

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

ENGLISH

10. Wired connection

In addition to operating wirelessly, your PX

headphones can be connected to audio sources

using the supplied audio jack and USB cables.

Audio jack cable connection is useful if the

headphones are to be used on board an aircraft

or with a non-Bluetooth audio source such as a

traditional hi- system.

Note: Your PX headphones need to be charged

and switched on to play audio using a jack.

USB connection enables your PX headphones

to function as a USB sound output device when

connected to a suitable computer.

Note: The USB and jack cables can be

connected simultaneously so that USB battery

charging can continue while the headphone jack

input is in use.

Connecting an audio jack cable and PX headphone

behaviour with the jack input in use is described in

the following paragraphs:

• Take one end of the jack cable and insert the

plug into the socket in the lower section of the

right ear piece. Make sure the plug is fully home.

Connect the other end of the cable to an audio

playback device’s headphone socket.

• The headphone volume controls and Play/

Pause button will not function when a jack cable

connection is in use.

• Connecting a jack cable will automatically pause

PX headphone Bluetooth streaming. To restore

Bluetooth streaming the jack cable must be

disconnected from the headphone ear piece.

Connecting and using the USB cable and PX

headphone behavior with USB input in use is

described in the following paragraphs:

• Disconnect any connected Bluetooth devices by

pressing the Bluetooth button on the right hand

ear piece twice in quick succession.

Note: Bluetooth must be disconnected for USB

audio to be played.

• Plug the small USB plug into the socket on

the underside of the right hand headphone ear

piece. Plug the larger USB plug into a computer

USB socket. If the computer USB socket is

powered, the headphone battery will immediately

begin to charge.

• Select the PX headphones as the playback

device in the computer’s audio output

control panel. Audio selected in computer

audio playback apps will now play through

your PX headphones.

• The headphone volume and Play/Pause controls

will function normally when playing USB audio.

• To restore headphone Bluetooth functions press

the Bluetooth button. The headphones will

attempt to connect to the last connected device.

11. Headphone Firmware Update

Your PX headphones will occasionally be subject to

rmware updates as performance is rened and new

features are added.

When a rmware update is available the headphone

app will display a notication. Tap on the notication

in the app to begin the update process.

Note: The headphones and mobile device must

remain switched on and in close proximity during

the rmware update process. It is important

also that the battery charge remaining in the

headphones is sufcient for the rmware update

to be completed. The app will indicate if there is

not enough battery charge available to complete

the rmware update.

12. Headphone Reset and Restart

Your PX headphones can be reset to their default

settings by using the Factory Reset option in

the headphone app, or they can be restarted by

pressing the pin-hole restart button located within

the right ear-piece. The pin-hole button is illustrated

in Diagram 1.

To use the restart button employ a straightened

paper-clip to press and hold for two seconds.

The headphones will turn off during the restart

process. Switch on the headphones to complete

the restart process.

Note: A pin-hole restart will not clear the

Bluetooth paired device memory.

13. Cleaning Your PX Headphones

Your PX headphones can be cleaned by using a

damp cloth and dabbing them until clean. Do not

rub the cloth on the leather. Do not use cleaning

detergents or leather polish as doing so may

damage your headphones.

Note: The PX headphone leather ear-piece

components are magnetically attached and can

be removed for cleaning if required by gently

pulling them away from the body of the ear-piece.

Diagram 7 Indicator Illumination

Diagram 8 Button Functions

Illumination Indication

Green (slow blinking) Battery charging

Green Headphones on, battery charge > 50%

Yellow Headphones on, battery charge > 30%

Red Headphones on, battery charge < 30%

Red (slow blinking) Battery charge insufcient for headphone operation

Red (ashing) Headphones powering off

Blue Bluetooth connection established

Blue (ashing) Bluetooth pairing mode active

Blue (slow blinking) Bluetooth pairing underway

Blue (repeating ash) Bluetooth pairing failed

White Environment Filter active

Button Action Function

On/Off/Bluetooth Slide Switch on

Slide and hold Switch off

Press and hold Enter pairing mode

Press Connect to last connected Bluetooth

device

2 x Press Disconnect all Bluetooth devices

On/Off/Bluetooth and

Volume –

Press and hold both Erase Bluetooth device memory

Environment Filter Press Engage or disengage last Environment

Filter setting selected in the app.

Volume + Press Increase volume

Volume – Press Decrease volume

Play/Pause Press Play or pause audio

2 x Press Play next track

3 x Press Play previous track

Note: The headphone volume controls and Play/Pause button will not function when a jack

cable connection is in use.

Play/Pause Press Answer or end telephone call

Press and hold Reject telephone call

Note: Telephone functions only operate when the headphones are connected via Bluetooth.

Play/Pause and

Volume +

Press both Switch audio cues on/off

Bowers Wilkins PX Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info