Bedienungsanleitung Braun 8360cc -5795 (Seite 12 von 70) (Alle Sprachen)

695426

Zoom out

Zoom in

Vorherige Seite

1/70

Nächste Seite

socket (9) / the charging stand (10a), until it clicks

into place. For cc models plug into the station

power socket (see chapter «Clean & Charge

Station»).

• For first-time charge, charge continuously for at

least 1 hour.

• The actual charge status is shown on the display.

Display

• The display information is dependent on the

model.

• Some models only show icons during charging or

operation. On other models a series of icons is

also shown after the shaver has been turned off.

• The table below shows the icons that can appear

on the shaver display.

Battery status

The battery status is shown

with segments and additionally

in digits (for some models also

with a battery icon).

• The status segments appear /

disappear gradually with the

status of the battery power.

• The digital number shows the

remaining shaving time in

minutes.

Plug reminder

(low charge / cordless operation only)

1. Flashing: Battery is in low

charge, i.e. 5 minutes

shaving time are left.

2. Fast flashing: This appliance

can only be operated

cordless. Disconnect the

shaver from the power supply

before turning it on.

Travel lock

When the travel lock icon

appears on the display, the

shaver is locked.

Replacement indicator

for Foil & Cutter cassette

The replacement indicator

shows the usage of the

Foil & Cutter cassette. The

status segments disappear

gradually with the numbers of

shaves*.

Cleaning indicator

(with Clean & Charge station usage only)

The cleaning indicator lights

up after each shave as

a reminder that the shaver

should be cleaned in the

Clean & Charge Station.

*not with all models

Usage

Make sure that the shaver is disconnected from the

power supply. Press the on / off button (4) to

operate the shaver.

Tips for a perfect shave

1. Position the shaver at the right angle (90°)

to your skin.

2. Stretch your skin slightly with your hand.

. Shave against the direction of your beard growth.

Multi Head Lock switch (head lock)

The shaver head can be locked in five positions to

shave hard-to-reach areas (e.g. under the nose).

• Slide the Multi Head Lock switch (3) down to lock

the shaver head.

• Move the shaver head manually to your desired

position.

• For automatic cleaning in the Clean & Charge

Station the head lock needs to be released.

Precision trimmer

The trimmer can be used to trim sideburns, mous-

tache or beard.

• Press the release button (8) and slide the trimmer

(6)

upwards.

Travel lock

The shaver can be locked to avoid unintended

starting of the motor (e.g. for storing in a suitcase).

• Press the on / off button (4) for 3 seconds to lock /

unlock the shaver. This is confirmed by a beep

sound and the lock icon appearing / disappearing

on the display.

Foil replacement

To maintain 100% shaving performance, replace the

Foil & Cutter cassette (1), when the foil replacement

indicator lights up (and no status segments are

visible).

• To remove the Foil & Cutter cassette press the

release button (2).

• Press the on / off button for 8 seconds to reset the

counter.

• Afterwards you need to unlock the shaver

(see chapter «Travel lock»).

• On some shaver models the replacement indicator

will reset automatically after 7 shaves.

Cleaning

Cleaning under running water

Especially important after foam or gel usage

• Switch on the shaver cordless and rinse the

shaver head under hot running water until all

residues have been removed.

You may use liquid

soap without abrasive substances. Rinse off all

foam and let the shaver run for a few more seconds.

• Next, switch off the shaver, press the release

button (2) to remove the Foil & Cutter cassette (1)

and let it dry.

91818830_83XXcc_W&D_MN_Type_5795.indd 1291818830_83XXcc_W&D_MN_Type_5795.indd 12 09.05.18 09:1509.05.18 09:15

Business Use - P&G AUTHORIZED POA-00044767 Rev 001 Effective Date 2018-05-14 Printed 2018-07-25 Page 12 of 72

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Braun 8360cc -5795 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info