Bedienungsanleitung Braun CT2s (Seite 11 von 66) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

514827

Zoom out

Zoom in

Vorherige Seite

1/66

Nächste Seite

English

Our products are designed to meet the highest

standards of quality, functionality and design.

Thank you for your trust in Braun’s quality and we

hope you enjoy your new Braun shaver.

This shaver cools the skin to give you a cooling

sensation for a pleasant shave.

Please read the use instructions carefully and

completely before using the appliance.

Warning

Your appliance is provided with a special cord set,

which has an integrated Safety Extra Low Voltage

power supply. Do not exchange or tamper with

any part of it, otherwise there is risk of an electric

shock. Only use the special cord set provided with

your appliance.

This appliance is suitable for use in a bath

or shower. For safety reasons the appli-

ance can only be operated cordlessly.

We recommend not to use the shaver with any

foam or gel to ensure that you

– experience the optimal cooling effect.

– get the optimal cleaning performance from the

Clean&Charge station (for cc models).

– avoid potential damage to the device.

Do not shave with a damaged foil or cord.

This appliance is not intended for use by children

or persons with reduced physical or mental

capabilities, unless they are given supervision by

a person responsible for their safety. In general,

we recommend that you keep the appliance out of

reach of children. Children should be supervised

to ensure that they do not play with the appliance.

Oil bottle (models CT4s/CT2s only)

Keep out of reach of children. Do not swallow.

Do not apply to eyes. Dispose of properly when

empty.

Clean&Charge Station (models CT6cc/

CT5cc/CT4cc/CT3cc/CT2cc only)

To prevent the cleaning fluid from leaking, ensure

that the Clean&Charge station is placed on a flat

surface. When a cleaning cartridge is installed,

do not tip, move suddenly or transport the station

in any way as cleaning fluid might spill out of the

cartridge. Do not place the station inside a mirror

cabinet, nor place it on a polished or lacquered

surface.

The cleaning cartridge contains a highly flammable

liquid so keep it away from sources of ignition.

Do not expose to direct sunlight and cigarette

smoking nor store it over a radiator. Keep away

from children.

Do not refill the cartridge and use only

original Braun refill cartridges.

Shaver description

1 Foil & Cutter cassette

2 Cooling element

3 Cooling on/off switch

4 Shaver display

5 On/off switch

6 Long hair trimmer

7 Shaver-to-shell/station contacts

8 Release button for long hair trimmer

9 Model number

10 Special cord set

11a Brush

11b Pouch

11c Protection cap

12a Charging shell

12b Shell power socket

12c Stand for charging shell

12d Shell-to-shaver contacts

First use and Charging

Prior to first use connect the shaver to an electrical

outlet using the charging shell as described below

or for models CT6cc/CT5cc/CT4cc/CT3cc/

CT2cc the Clean&Charge station (see Chapter

«Clean&Charge station»).

Note: The shaver can only be charged via the

charging shell or the Clean&Charge station.

Models CT4s/CT2s must not be used with the

Clean&Charge station.

Charging shell (see fig. B)

• Click the charging shell (12a) onto the stand (12c

- models CT4s/CT2s only). Using the special cord

set (10), connect the shell power socket (12b) to

an electrical outlet.

• Place the shaver into the charging shell. The

contacts (7) on the back of the shaver need to

align with the contacts (12d) in the charging shell.

A beep sound confirms that the shaver sits prop-

erly in the station.

• The shaver will be automatically charged.

Charging and basic operating information

• A full charge provides up to 45 minutes of shaving

time (up to 15 minutes with activated cooling

function). This may vary according to your beard

growth and environmental temperature.

• Recommended ambient temperature for charging

is 5 °C to 35 °C. The battery may not charge properly

or at all under extreme low or high temperatures.

Recommended ambient temperature for shaving

is 15 °C to 35 °C.

• Do not expose the appliance to temperatures

higher than 50 °C for extended periods of time.

• When the shaver is connected to an electrical

outlet, it may take some minutes until the display

illuminates.

96189703_CoolTec_MN_S6-68.indd 1196189703_CoolTec_MN_S6-68.indd 11 11.10.12 10:4211.10.12 10:42

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Braun CT2s Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info