600029
10
Zoom out
Zoom in
Vorherige Seite
1/95
Nächste Seite
Place the appliance on a stable, level surface
(like a table or the floor).
Note:
If you use filtering devices, make absolutely sure
the water obtained is neutral ph.
Low Water
When the water level is low, the icon is
permanently on.
The temperature control LED (12) is blinking and
the icon related to the selected setting / /
turns off.
If you want to continue steam ironing, refill the
tank of the steam station (A).
(B) Start ironing
Place the iron on the iron rest (5) or on its heel
rest (15), plug in the appliance and press the on/
off switch on the station (2).
Select the setting (3) on the ironing system most
suitable for the garments to be ironed.
The iron will start to heat up: Whilst this is
happening, the temperature control LED (12) on
the iron will flash.
The related icon in the display (1) will start to blink
until steam is ready.
Once the temperature setting is reached, the
temperature control LED is permanently on.
For steam ironing press the steam button (11)
below the iron handle. Steam will come out from
all the holes in the soleplate.
The ultimate iCare technology provides the right
combination of temperature and steam.
The interface (3) has 3 settings:
eco
It is suggested for most delicate garments like
synthetics and blended fabrics. This setting allows
less power consumption.
normal
It is suggested for garments like wool, polyester
and silk.
turbo
It is suggested for garments that need more
powerful steam, like cotton, linen and jeans.
Note: Due to higher temperature in the turbo mode,
do not leave unattended the iron on garments to
avoid any damage.
To switch from one setting to another press the
dedicated button (3).
Note: When the ironing system is switched on, it will
always be set to the normal steam mode,
independently on the last setting chosen.
Double trigger: Press the steam button (11) or
the precision shot button (13) twice in quick
successionwithin 1 second. There will be a
continuous steam emission for a few
seconds.Press the steam button (11) or the
precision shot button (13) once again to stop the
function.
For dry ironing select the setting most suitable
for the garments to be ironed, then iron without
pressing the steam button (11).
Please note that after 10 minutes of dry ironing,
the iron switches to the auto-off mode.
Vertical steam: The iron can also be used for
steaming hanging clothes (B).
The special Saphir coating of the soleplate
guarantees an excellent scratch resistance.
The unique round shape of the Saphir 3D
soleplate ensures best gliding results on difficult
parts (e. g. buttons, pockets and tough wrinkles).
(C) Precision shot
Press the precision shot button (13) completely
down.
Steam will come out of the tip area of the
soleplate only.
To stop this function just release the button (13).
If you don’t press it down completely, some
steam may also come out from the rear steam
holes in the soleplate.
(D) Iron Auto-Off
When the iron is in the auto-off mode, the icon is
flashing and the temperature control LED (12) is off.
The iron will turn off to reduce power consumption.
It is activated if after 10 minutes:
there has been no steam emission.
the icon
is activated and water tank is not
refilled.
To turn the iron on again, the ON/OFF (2) button
has to be pressed. Before starting ironing again wait
until the temperature control LED (12) is
continuously on.
After ironing
Press the On/Off button to turn off the appliance (2).
Unplug and let the appliance cool down before
storing.
Empty the water tank.
Lock the iron.
9
DLB236337_CareStyle_5_IS5055_Use_Instruction_INT.indb 9 16.06.15 16:03
10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

braun-is-5055-carestyle-5-pro

Suche zurücksetzen

  • Kann ich den Wasserbehälter an der bügelstation care Style 5 pro zur Reinigung von der Station entfernen und wie geht das ? Eingereicht am 26-6-2024 16:30

    Antworten Frage melden
  • Meine pro 5 macht hellbraune Flecken es kommt eine hellbraune flüssigkeit raus Eingereicht am 9-8-2020 15:03

    Antworten Frage melden
  • Wie entkalke ich braun Bügeleisens Carstyle 5 pro Eingereicht am 15-10-2019 12:26

    Antworten Frage melden
  • Beim Damp kommt aus der duesen sehr viel Gelbes Wasse dadurch werden die kleidungs stücke gelblich es kommt sehr viel wasser anstadt damp wie kann ich entkalken
    Eingereicht am 1-2-2019 20:04

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Braun IS 5055 CareStyle 5 Pro wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info