Directions for use
Solar LED-Spot SOL 800 DE 3495
Thank you for choosing our product. Before you use the product for the first time, you
need to familiarize yourself with the following operating instructions and safety warnings.
Only use the device as described and only for the areas of use that are indicated.
Keep these instructions. If the device is given to someone else, make sure these
instructions go with it.
PARTS LIST
01 Bracket
02 Connecting cable light
solar module
03 Mounting screws
for solar module (4x)
04 Solar module
05 Main unit
06 LED-unit
07a Main unit holder
07b Main unit mounting screws
07c Clip
08 Motion detector
09 AUTO / OFF switch
10 Control- light duration
INITIALLY CHARGING THE SOLAR POWERED LIGHT
Before you put the solar light into operation, it will need to be charged.
You have two options:
Charging via the Solar Module:
Connect the solar module (4) cable (2) with the main unit (5).
The ON / OFF switch (9) on the main unit must be set to OFF. Put the solar module in a
location where it will get maximum exposure to direct sunlight. Refer to the notes on
suitable installation locations in the following section.
Depending on time of year, weather and the location of the solar module, it may take up
to 4 days before the light is charged and ready to use.
013417 Solar LED-Strahler SOL 800.qxp_013417 BA_Solar LED-Strahler SOL 800 19.03.18 10:20 Seite 7
