Bedienungsanleitung Bresser 4701170 (Seite 11 von 36) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

784604

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

General Information

About this Instruction Manual

Please read the safety instructions in this manual carefully. To avoid

damage to the unit and the risk of injury, only use this product as

described in the manual.

Keep the instruction manual handy so that you can easily look up infor-

mation on all the functions.

CAREFUL

You will find this symbol before every section of text

that deals with the risk of minor to severe injuries

resulting from improper use.

ATTENTION

You will find this symbol in front of every section of

text which deals with the risk of damage to property

or the environment.

Intended Use

This product is intended only for private use.

It was developed for the magnified display of things in nature.

General Warning

RISK OF BLINDNESS

Never use this device to look directly at the sun or in the direct

proximity of the sun. Doing so may result in a risk of blindness.

CHOKING HAZARD

Children should only use the device under adult supervision.

Keep packaging material, like plastic bags and rubber bands,

out of the reach of children, as they pose a choking hazard.

FIRE RISK

Do not place the device, particularly the lenses, in direct sun-

light. The concentration of light could cause a fire.

RISK OF ELECTRIC SHOCK

This device contains electronic components which operate

via a power source (power supply and/or batteries). Children

should only use the device under adult supervision. Only use

the device as described in the manual; otherwise, you run the

risk of an electric shock.

RISK OF CHEMICAL BURN

Keep batteries out of the reach of children! Make sure you

insert the batteries correctly. Empty or damaged batteries

could cause burns if they come into contact with the skin. If

necessary, wear adequate gloves for protection.

RISK OF FIRE/EXPLOSION

Do not expose the device to high temperatures. Use only the

recommended batteries. Do not short-circuit the device or bat-

teries, or throw them into a fire. Excessive heat or improper

handling could trigger a short-circuit, a fire or an explosion.

ATTENTION

Do not disassemble the device. In the event of a defect, please

contact your dealer. The dealer will contact the Service Centre

and can send the device in to be repaired, if necessary.

Privacy Protection

This device is intended only for private use. Please

heed the privacy of other people. Do not use the

device to look into apartments, for example.

Accessories may vary depending on the model.

Parts overview (No. 1-8)

B Telescope tube

C Tube opening

D Eyepiece connection

E Focus wheel

F Handbox

G Eyepiece holder

H Handbox tray

I Azimuthal lock

J Tripod

1! Battery compartment

1@ Locking screw

1# Accessory tray

1$ Altitude locking knob

1% Dust cover

1^ Eyepieces

1& Moon filter

1* Compass

1( Star map

Handbox (No. 9)

B Red light source

C Handbox display

D Plus/minus key

E Illumination

F Centre key

G Arrow keys

H Number pad

I Mini-USB port1

J RJ-45 port1

1) RJ-22 port1

1NOTE:

The ports of the handbox (8, 9 and 10) are prepared for future develop-

ments, but are not active at the moment. Currently there are no addi-

tional accessories (e.g. serial cable etc) available. Information about

new developments for this product can be found on our website under

www.bresser.de/download/automatic_telescopes

Part I – Construction

1. General/Location

Before you begin assembly, choose a suitable location for your tel-

escope. It is best to build the telescope in a place where you have a

clear view of the skies, a stable footing and sufficient space around

you.

Before beginning assembly, remove all the parts from the packaging,

and, using the diagram, check to make sure no parts are missing.

2. Tripod

Take the tripod (9) out of the box. Carefully open the legs and place the

tripod on a level surface place and lock the accessory tray (13) on the

centre knob and rotate until it snaps in place (No. 3).

Note: Please do not forget to remove the accessory tray before

collapsing the tripod.

3. Telescope

Loosen the screw (12) in the dovetail mount so that it is completely

retracted (No. 4). Place the telescope with the dovetail in the mount

and tighten the screw. Make sure that the BRESSER logo is upright.

4. Altitude knob

Loosen the vertical knob by rotating it anticlockwise, align the optical

telescope tube (1) horizontally and retighten the knob (No. 5).

5. Mount

Place the mount base's mounting holes on the tripod's mounting

screws and tighten them (No. 6).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bresser 4701170 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info