Bedienungsanleitung Bresser 7002540 PROFI W-LAN WETTER CENTER (Seite 18 von 20) (Deutsch, Englisch)

729972

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Temperature unit °C / °F

Temperature measuring range -40° - 80° C

Humidity measuring range 1% - 99%

Time display HH:MM:SS

Time format 12 or 24 hours

Calendar display TT/MM or MM/TT

6-in-1 Multi Outdoor sensor

Batteries 3 x AA, 1.5 V

Temperature unit °C / °F

Temperature measuring range -40° - 60° C

Humidity measuring range 1% - 99%

Rainfall unit mm, inch

Rainfall measuring range 0 - 9999 mm (0 - 393.7 inch)

Wind speed unit mph, m/s, km/h, knots

Wind speed measuring range 0 - 112 mph, 0 - 50 m/s, 0 - 180

km/h, 0 - 97 knots

Wind direction display 360° or 16 directions

Dimensions 392 x 326 x 144.5 mm

Weight 1096 g (with batteries)

Indoor sensor

Batteries 2 x AA, 1.5 V

Temperature unit °C / °F

Temperature measuring range -40° - 60° C

Humidity measuring range 1% - 99%

Dimensions 61 x 113 x 39.5 mm

Weight 144 g (with batteries)

CLEANING AND MAINTENANCE

Before cleaning the device, disconnect it from the power supply (remove

batteries)!

Only use a dry cloth to clean the exterior of the device. To avoid damaging

the electronics, do not use any cleaning uid.

Cleaning the rain collector (sinkhole)

Fig. 26

‚Lock‘ position ‚Unlock‘ position

1. Rotate the rain collector by 30° anticlockwise.

2. Gently remove the rain collector.

3. Clean and remove any debris or insects.

4. Install all the parts when they are fully clean and dried.

Cleaning the thermo/hygro sensor

Fig. 27

1. Unscrew the 2 screws at the bottom of the radiation shield.

2. Gently pull out the shield.

3. Remove carefully any dirt or insects inside the sensor casing

NOTE!

The radiation shield comprises different parts inserted one inside an-

other. Two bottom parts are closed. Do not change their order!

Do not let the sensors inside get wet!

4. Clean the shield with water and remove any dirt or insects.

5. Install all the parts back when they are fully clean and dried.

CLEANING THE UV SENSOR AND CALIBRATION

For the most accurate readings, please use pure water to clean the UV

sensor cover lens before mounting, and then periodically. You can also

calibrate the UV index with some instrument grade UV meter to main-

tain a high accuracy of the UV index reading.

1. In normal mode of the main unit, press and hold [ INDEX ] key for 8

seconds to enter into UV index calibration mode

2. Use [ GRAPH /

] or [ °F / °C / ] key to adjust the UV gain magni-

cation factor

3. Press the [ INDEX ] key twice to conrm and exit the setting

Note:

The default UV gain magnication factor is 1, user can increase or de-

crease the value per 0.1.

MAIN UNIT FIRMWARE UPDATE

1. Unzip the “Update.zip” le

2. Copy the unzipped “Update” folder to your USB mass storage drive

(USB Stick)

Important note:

- The USB mass storage drive should be FAT32 format

- The “Update” folder must be located in the USB mass storage

drive’s root directory

3. Disconnect the main unit's DC power from the power outlet and

remove the backup batteries. Plug the USB mass storage drive to

the USB socket at the right side of the main unit

4. Reconnect the main unit's DC power to start the update process

Important note:

- In the meantime, do not remove the USB mass storage drive

- If the rmware update still not restart, you can try to press the reset

key to trigger the update process

5. During the update process the LCD will show the update status as

below:

Updating screen Update completed and waiting for reboot

6. Once the update completed, the main unit will restart and return to

the normal display screen

7. Remove the USB mass storage drive from the main unit

8. Set the time zone on the main unit

9. Enter the WUnderground connection information and set time server

in the setup UI

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bresser 7002540 PROFI W-LAN WETTER CENTER Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bresser 7002540 PROFI W-LAN WETTER CENTER

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info