Bedienungsanleitung Bresser 7002540 PROFI W-LAN WETTER CENTER (Seite 17 von 20) (Deutsch, Englisch)

729972

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

MIN records. The display sequence is: outdoor MAX temperature &

humidity  outdoor MIN temperature & humidity  current channel’s

indoor MAX temperature & humidity  current channel’s indoor MIN

temperature & humidity  MAX average  MAX gust  MAX dew

point MIN dew point  MAX wind chill  MIN wind chill  MAX heat

index  MIN heat index  MAX UV index  MAX Beaufort  MAX

pressure  MIN pressure  MAX rain rate.

2. Press and hold [ MAX / MIN ] key for 2 seconds to reset all the MAX/

MIN records.

WEATHER WARNING/ALERT

Weather Alert can alert you of certain weather conditions. Once the alert

criterion is met, the alarm sound will activate and the LCD’s alert icon

will ash.

To set the alert

1. In normal mode, press and hold [ ALERT ] key for 2 seconds to enter

alert setting mode

2. During alert setting mode, press [ ALERT ] key to switch to the next

items in the sequence below:

Alert Setting

Range

Display Section Default

Value

Outdoor Temperature

High

-40°C ~ 80°C

Outdoor tempe-

rature & humidity

section (OUT-

DOOR)

40°C

Outdoor Temperature Low 0°C

Outdoor Humidity High

1% ~ 99%

80%

Outdoor Humidity Low 40%

Indoor Temperature High

-40°C ~ 80°C

Indoor tempera-

ture & humidity

section (INDOOR)

40°C

Indoor Temperature Low 0°C

Indoor Humidity High

1% ~ 99%

80%

Indoor Humidity Low 40%

Wind Speed

0.1m/s ~

50m/s

Wind direction

& speed section

(WIND)

172mm/h

Pressure Drop (within 30

minutes)

1hPa ~ 10hPa

Barometer section

(BARO)

3hPa

Rainfall 1mm ~ 1000

Rainfall section

(RAINFALL)

100 mm

3. Press [ GRAPH / ] or [ °F / °C / ] key to adjust the value or press

and hold the key to change rapidly

4. After completing the rainfall alert setting, press [ ALERT ] key to save

and exit the setting mode

To activate the alert

1. In normal mode, press and hold [ ALERT ] key for 2 seconds to enter

alert setting mode

2. During alert setting mode, press [ ALARM ] key to toggle the regarding

alert

3. After setting Rainfall Alert, press [ ALERT ] key to save and exit the

setting

NOTE!

1. The unit will automatically exit setting mode in 5 seconds if no button

is pressed.

2. When ALERT alarm is on, the area and type of alarm that triggered the

alarm will be ashing and the alarm will sound for 2 minutes.

3. Press ALARM/SNOOZE button when alarm sounds to interrupt the

alarm. The alarm will then start again after 5 minutes.

POINTING 6-IN-1 SENSOR TO THE SOUTH

The 6-in-1 outdoor sensor is calibrated to be pointing to North by de-

fault. However, in some cases, users may wish to install the product with

the arrow pointing towards the South, especially for people living in the

Southern hemisphere (e.g. Australia, New Zealand).

1. First install the 6-in-1 outdoor sensor with its arrow pointing to the

South. (Please refer to 'Installation' chapter for mounting details)

2. Press and hold INDEX button for 8 seconds. Press the INDEX button

again until the N Symbol (Northern hemisphere) is blinking.

3. Use

or button to change to lower part (Southern hemisphere).

4. Press INDEXT button again to conrm and exit.

NOTE!

Changing from hemisphere setting will automatically switch the direction

of the moon phase on the display.

MOON PHASES

In the Northern hemisphere, the moon waxes (the part of the moon we

see that glows after the New Moon) from the right. Hence the sun-lit area

of the moon moves from right to left in the Northern hemisphere, while in

the Southern hemisphere, it moves from left to right.

Below are the 2 tables which illustrate how the moon will appear on the

main unit.

Northern hemisphere:

New moon Full moon

Waxing crescent Waning gibbous

First quarter Third quarter

Waxing gibbous Waning crescent

Southern hemisphere:

New moon Full moon

Waxing crescent Waning gibbous

First quarter Third quarter

Waxing gibbous Waning crescent

SUNRISE & SUNSET TIME

The main unit indicates your location’s sunrise & sunset time by the time

zone, latitude and longitude you entered. Please insert the correct infor-

mation in the related settings. If the latitude and longitude values do not

match the time zone, the sunrise & sunset time cannot be shown.

TROUBLESHOOTING

Problem/Symptom Solution

Strange or no measure-

ment of rain sensor

1. Check drain hole in the rain collector.

Clean it if neccessary.

2. Check the circular level. Realign the

device if neccessary.

Strange or no measure-

ment of Thermo/Hygro

Sensor

1. Check radiation shield. Clean it if

neccessary.

2. Check sensor housing. Clean it if

neccessary

and --- (no signal

for 15 minutes)

1. Relocate main unit and 6-in-1 sensor

closer to each other.

2. Make sure the main unit is placed

away from other electronic appliances

that may interfere with the wireless

communication (TV‘s, computers,

microwaves).

3. If problem continues reset both, main

unit and 6-in-1 sensor.

and ER (no Signal for

1 hour)

SPECIFICATIONS

Main unit

Main power DC 5V 1A

Type: XLJXA-E050100

Batteries (backup) 3 x AAA, 1.5 V

Barometer unit hPa, inHg, mmHg

Barometer measuring range 540 - 1100 hPa

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bresser 7002540 PROFI W-LAN WETTER CENTER Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bresser 7002540 PROFI W-LAN WETTER CENTER

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info