Bedienungsanleitung Bresser 7006300 - Tuya Smart (Seite 14 von 88) (Deutsch, Englisch, Holländisch, Französisch, Spanisch)

784615

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

FIRMWARE UPDATE

The console can be updated through your WI-FI network. If new rmware is available, a

notication or pop up message will be shown on your mobile when you open the App. Follow the

instruction in the App to do the update.

During the update process, the console will show the

progress status percentage at the bottom of the screen.

Once the update complete, the console screen will reset

and back to normal mode. Please ignore App update

fail message, if the console can restart and show the

normal screen after the update process completed.

IMPORTANT NOTE:

- Please keep connecting the power during the rmware update process.

- Please make sure your console WI-FI connection is stable.

- When the update process start, do not operate the console until the update is nished.

- Settings and data maybe lost during update.

- During rmware update the console will stop upload data to the cloud server. It will reconnect to your

WI-FI router and upload the data again once the rmware update succeed. If the console cannot

connect to your router, please enter the SETUP page to setup again.

- Firmware update process have potential risk, which cannot guarantee 100% success. If the update

fail, please redo the above step to update again.

- If rmware update fail, press and hold the [C/F] and [REFRESH] key at the same time with 10

seconds to back to original version, then redo the update procedure again.

OTHER SETTING & FUNCTIONS OF THE CONSOLE

MANUAL CLOCK SETTING

This console is designed to obtain the local time by synchronizing with your local time. If you want

to use it o󰀨 line, you can set the time and date manually. During the rst time startup, press and

hold the [ SENSOR / WI-FI ] key for 6 seconds and let the console back to normal mode.

1. In normal mode, press and hold [ TIME SET ] key for 2 seconds to enter setting.

2. The setting sequence: 12/24 hour format Hour Minute Year M-D/D-M format

Month Day Time sync ON/OFF weekday Language.

3. Press [ + ] or [ - ] key to change the value. Press and hold the key for quick-adjust.

4. Press [ TIME SET ] key to save and exit the setting mode, or it will automatically exit the

setting mode 60 seconds later without pressing any key.

NOTE:

- In normal mode, press [ TIME SET ] key to switch between year and date display.

- During the setting, you can back to normal model by press and hold [ TIME SET ] key for 2 seconds.

SETTING ALARM TIME

1. In normal time mode, press and hold [ MODE / ALARM ] key for 2 seconds until the alarm

hour digit ashes to enter alarm time setting mode.

2. Press [ + ] or [ - ] key to change the value. Press and hold the key for quick-adjust.

3. Press [ MODE / ALARM ] key again to step the setting value to Minute with the Minute digit

ashing.

4. Press [ + ] or [ - ] key to adjust the value of the ashing digit.

5. Press [ MODE / ALARM ] key to save and exit the setting.

NOTE:

- In alarm mode, the “ ” icon will display on the LCD.

- The alarm function will turn on automatically once you set the alarm time.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bresser 7006300 - Tuya Smart Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info