Bedienungsanleitung Bresser Digital Microscope (Seite 19 von 74) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

480805

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

ready on your system, you may skip to step 5.

4. In the welcome window, please accept the

Microsoft license agreement, and then click

“Install”. The installation can take a few min-

utes. As soon as everything is installed, click

“Finish”.

5. Now you will be presented with a choice, in

which you can choose your language.

Make your selection and conrm it by click-

ing „OK“.

6. When you see “Welcome“, click on „Next“.

7. In the next window, you will be asked for

the „Destination Folder“. Here, just click on

„Next“.

8. Now, the window with the Setup-Status will

appear – here, a progress bar will inform you

about the ongoing installation. This process

can take a few minutes.

9. Now, the window „Completed the Pho-

tomizer Setup Wizard “ will appear. At this

point, the driver installation begins, and a new

window opens. Here, click on „Next“ and

then on „Install“.

10. A pop-up window will appear; click there

on “continue installation”.

11. Finally, the window “driver installation

complete” appears.

12. Now, you will be asked to restart your

computer; click here on „Finish“.The installa-

tion is now complete.

Tip:

If you have questions or problems with the

“Photomizer SE” software, you can always go

to the program’s menu bar, and click on „?“

and then on „Open help“. For questions or

problems, you can look on the website www.

photomizer.net . Please ask your parents be-

fore using the Internet.

2.2 Driver installation

During Photomizer SE software installation

the correct driver for your operating system

will be installed automatically. No manual in-

put is needed.

In rare cases the device may not be recog-

nised by your computer. As a rule you need

then only install the driver manually from the

CD. If this fails please refer to the trouble-

shooting chapter that follows.

2.3 Troubleshooting: the device isn‘t

recognised by the computer (USB)

1. This occurs in rare cases whith some

OEM Windows Vista or XP versions. The de-

vice is not defective. Updating the notebook

or PC USB driver usually sufces.

2. If not, proceed as below. (The maker can-

not accept any liability whatsoever in these

cases

Delete ghost devices. These are devices

not actually currently connected to your com-

puter. The reason for this is that Windows

generates a system settings entry for each

USB device ( e.g USB Stick) on each port.

It then seeks that/those device/s each time

it‘s started. This slows down USB device rec-

ognition and Windows booting and causes

non-recognition of USB ports.

Cleaning up the system environment and de-

leting devices that are no longer in use helps

here. To do so right click WORKPLACE

(COMPUTER in Vista) and open the PROP-

ERTIES menu. Then click the ADVANCED

tab as in illustration 6 (ADVANCED SYSTEM

SETTINGS in Vista) and then ENVIRON-

MENT VARIABLES. Choose the NEW option

in ENVIRONMENT VARIABLES as in illustra-

tion 7. Enter the following under VARIABLE

NAME as in illustration 8.

devmgr_show_nonpresent_devices

Under VARIABLE VALUE enter „1“.

Conrm your input with OK and then reboot

the computer.

Change to the device manager. In the

VIEW menu activate the SHOW DEVICES

OPTION. The ghost devices previously not

shown will now be displayed in light grey.

Check the various categories including USB,

memory size, etc. Only delete entries for

devices you no longer use.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bresser Digital Microscope Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info