Bedienungsanleitung Bresser LED - LG-Serie (Seite 11 von 16) (Deutsch, Englisch)

771777

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

diffusion ﬁlter is delivered with nthe purchase and allows for

a glare-free and diffuse light. In addition, a variety of suitable

accessories are available to meet speciﬁc lighting requirements.

Features of the BRESSER LS/LG Series

1. Energy-saving and durable LED light

2. High luminosity due to its extreme bright LEDs with RA>85

Colour temperature: 3,200K to 5,600K adjustable (LS/LG

bi-color) or 3,200K/5,600K changeable with colour ﬁlter

(LS/LG standard)

4. Optimal adaption of the luminosity with dimmer (10% - 100%)

5. High durability (approx. 50,000 hours)

6. Low heat generation and low power consumption; suitable

for long-term lighting

7. Perfect light control through four barn doors

Power supply: 200V to 240V AC at 50Hz with power cable or

12V DC with suitable mains adapter1 or 12V DC with V-Lock

batteries2 (e.g. Sony V-Lock) through the integrated adapter

9. Chnaging of the lighting angle through U-bracket

10. Lightweight housing

11. Standard connection for light stands

Overview control and lighting unit

Models LS standard and LG standard (Fig. 2+3)

A: Socket for 12V DC power supply

B: On/Off switch for mains voltage

C: Stepless dimmer for LED light with On/Off switch

D: On/Off switch for DC power

E: C13 socket for power cable

F: Fuse holder

G: Fixing screws for U-bracket

H: Fixing screw for stand

I: V-Lock connection (nicht bei LS-1200)

L: LED illumination panel (ﬁrmly installed)

M: Barn doors

N: Diffusion ﬁlter plate

O: Colour ﬁlter plate 3,200K

P: Holder for ﬁlter plate

Models LS bi-color and LG bi-color (Fig. 2a + 3)

A: Socket for 12V DC power supply

B: On/Off switch for mains voltage

C: Stepless dimmer for LED light with On/Off switch

D: On/Off switch for DC power

E: C13 socket for power cable

F: Fuse holder

G: Fixing screws for U-bracket

H: Fixing screw for stand

I: V-Lock connection (nicht bei LS-1200)

J: LCD

K: Stepless colour temperature controller with selector switch

L: LED illumination panel (ﬁrmly installed)

M: Barn doors

N: Diffusion ﬁlter plate

P: Holder for ﬁlter plate

Preparation and maintenance

Mount the LED panel light on a light stand with sufﬁcient load-

bearing. Vertically align the lighting. Open the barn doors and

and insert the desired ﬁlter plate sidewards. Make sure the ﬁlter

is completely installed in front of the panel light.

1. Changing the fuse (Fig. 4)

GEFAHR EINES STROMSCHLAGS!

Disconnect the device from the power supply (remove plug or

remove batteries) beforr changing the fuse!

Open the fuse slot with a ﬂat head screwdriver as shown on

the image. The spare fuse is stored in a tube in front of the

currently used fuse.

2. Insert the new fuse in the lower holder and put it back into

the fuse slot.

2. Changing the light source

NOTE!

The LED illumination ist ﬁrmly installed and can therefore not be

changed. In case of a defect, please contact the Service Hotline.

3. Installing a diffusion ﬁlter or colour ﬁlter (only for

models LS standard and LG standard) (Fig. 5)

NOTE!

Remove the protection foil from both sides of the ﬁlter plate

before installing it.

Make sure the ﬁlter plate is clamped behind the upper, lower and

left handed holders (Fig. 5, P) when inserting it.

1. Turn off the device and let it cool down.

Open the right barn door (Fig. 3, M) so that it is standing upright.

3. Insert the ﬁlter plate (Fig. 3, N oder O) from right to left behind

the barn doors in front of the illumination panel.

4. Installing a softboxen (optional) (Fig. 6)

Turn off the device and let it cool down.

2. Open the barn doors (Fig. 3, M) and remove the ﬁlter plate

(Fig. 3, N or O).

Slide the softbox3 holders over the barn doors and ﬁx them

with the straps on the ﬁxing screws of the U-bracket (Fig. 2, G).

4. Add the softbox3 to the holders.

Startup procedure/Turning on the device

1. Power supply

NOTE!

Depending on the model, up to three different types of power

supply are available for the LED panel lights. Only one type of

power supply can be used. If using more than one power source

simultaneously (e.g. AC mains voltage and 12V DC power) the

light or devices that have been added to it will be damaged. A

connected battery can not be charged with the light.

1.1. AC mains voltage (recommended)

1. Put the C13 coupling of the power cable into the C13 socket

(Fig. 2, E) at the light housing.

2. Put the Euro plug of the power cable into the power outlet

(240V max. voltage).

3. Turn on the device with the On/Off switch (Fig. 2, B) for AC

mains voltage.

1.2. DC voltage (optional)

NOTE!

The manufacturer is not liable for voltage damage due to the

use of an improper accumulator.

1. Put the plug of the 12V power adapter cable4 into the slot for

12V DC power supply (Fig. 2, A) at the light housing.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bresser LED - LG-Serie Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info