562815
73
Zoom out
Zoom in
Vorherige Seite
1/112
Nächste Seite
67
General playback problems
If youre having general problems playing content with BrightSign, try the following:
1 Make sure you have the latest AUTORUN.BAS file that is compatible with your BrightSign
software. You can
download the latest Autoplay script from
www.brightsign.biz/support
NOTE:
HD2000 1.3 software requires AUTORUN.BAS v1.3x or later, and HD2000 2.x software
requires AUTORUN.BAS v2.x or later.
2 Download the BrightSign demo and make sure it plays (see Step 3: Try the demo for details).
If you’re also having playlist problems, test the Playlist Demo.
3 Make sure your content meets the following specifications:
Audio:
MP3, 48Khz sample rate (or 44.1KHZ sample rate on the HD2000), or WAV with 16 bit
linear PCM data on the HD2000.
Video:
Standard MPEG-2 program stream, with 48Khz audio layer (audio layer not required on
the HD2000). Maximum resolution is 1920 x 1080 (HD2000) or 1280 x 720 (HD600).
Image:
Bitmap, 8-bit, 24-bit, or 32-bit only or PNG/JPEG files on the HD2000
4 Reformat your CF/SD card as FAT32.
5 Copy your content, and any scripts, playlists, or interactive playlists to the CF/SD card again.
6 Download and install the latest BrightSign software. If you’re already using the latest
software, reinstall the software (see Step 2: Get the latest BrightSign software for details).
7 Try using a different brand and/or size CF/SD card.
8 Re-create content with different software, if possible.
Video output includes artifacts, or video quality is poor
Make sure that the format of your video content matches the properties of the display resolution
and that you’ve chosen the highest quality output possible. Since most video output modes are
progressive, you need to encode video files as progressive MPEG-2 files for the highest quality
video reproduction. Otherwise you may see video artifacts when the video is digitally interlaced
on a progressive display.
73

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für BrightSign HD600 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info